North American Arms Mini-Master 22 Mag 4in Revolver – Proven Kit Gun

$403.77

The North American Arms Mini-Master 22 Mag (NAA-MM-M) is a 10.8-ounce stainless five-shot single action with a 4 inch heavy vent barrel, fixed Marble Arms sights, bull cylinder and oversized rubber grip.

Out of stock

SKU: 744253000591 Categories: , , Tags: , Brand:

Description

The North American Arms Mini-Master 22 Mag is the long-barreled member of the NAA family: a five-shot 22 Magnum single action with a 4 inch heavy vent barrel, a bull cylinder and an oversized rubber grip. Built of stainless steel in Provo, Utah, it turns the pocket mini into a small kit gun that shoots far better than its size suggests.

North American Arms Mini-Master 22 Mag NAA Mini-Master 22 Magnum revolver with 4 inch heavy vent barrel and rubber grip

North American Arms Mini-Master 22 Mag Overview

This is model NAA-MM-M, the fixed-sight version. It measures 7.88 inches long, 3.69 inches tall and about an inch wide, and weighs 10.8 ounces. The heavy barrel carries a ventilated rib and fixed Marble Arms sights, giving a much longer sight radius than the 1-5/8 inch minis. A 22 LR-only version (NAA-MM-L) and a convertible model with both cylinders (NAA-MM-C) are sold separately; this one is chambered for 22 WMR only.

A Mini With a Real Sight Radius

The biggest difference from the pocket minis is how it shoots. The 4 inch barrel and taller sights let most shooters keep hits on a paper plate at 15 yards and beyond, and the extra barrel length adds noticeable velocity to 22 Magnum loads. That makes it a fun plinker and a capable small-game or tackle-box gun.

North American Arms Mini-Master stainless revolver right side

Grip and Handling

The oversized rubber grip gives a full three-finger hold, which most of the small NAA revolvers cannot. Recoil is mild, but the report from a 22 Magnum in a short revolver is sharp, so wear hearing protection. Like every NAA, it is a single action with a spur trigger, so you cock the hammer for each shot.

Loading and Safe Carry

Every NAA mini loads the same way: press the base pin latch, pull the cylinder pin, drop the cylinder out, load or punch out the five rounds and reassemble. After loading, lower the hammer into one of the notches cut between the chambers so it never rests on a live rim. Practice this with an empty gun until it is automatic. The bull cylinder is the same five-shot design as the smaller magnum minis.

Holsters and Carry

At almost 8 inches long, the Mini-Master is not a pocket gun. NAA and several leather makers offer belt holsters cut for it, and it rides well in a pack or tackle box. Check holster fit by model number, because the 4 inch barrel and rib will not fit the cut-down pocket holsters made for the 1-5/8 inch guns.

Ammunition Notes

Use only 22 WMR in this cylinder. Rimfire magnum ammunition costs more than 22 LR and supply comes and goes, so buy a few boxes of a load that runs well. Bullet weights from 30 to 45 grains all work; heavier bullets often group better from the longer barrel.

State Laws and Ownership

Mini-revolvers are legal to own in most of the country, but several states limit which handguns a dealer may transfer. California, Massachusetts, Maryland and New York keep rosters or approval lists, and some cities require a purchase permit first. Concealed carry rules differ widely, and a permit is required in many states even for a revolver this small, so check your local law before you order.

Specifications

  • Manufacturer: North American Arms, Provo, Utah
  • Model: Mini-Master, NAA-MM-M
  • UPC: 744253000591
  • Caliber: 22 WMR (22 Magnum)
  • Action: Single action
  • Capacity: 5 rounds
  • Barrel: 4 in. heavy vent barrel
  • Overall length: 7.88 in.
  • Height: 3.69 in.
  • Width: 1 in.
  • Weight: 10.8 oz
  • Sights: Fixed Marble Arms
  • Grips: Oversized rubber
  • Cylinder: Bull cylinder

Before You Buy

Federal law requires handgun purchasers to be at least 21 years old to buy from a licensed dealer, and this revolver must ship to an FFL where you will complete the transfer and background check.

Who It Is For

The North American Arms Mini-Master 22 Mag is a great fit for shooters who want a small 22 Magnum revolver they can actually hit with at distance, trappers and anglers looking for a light kit gun, and NAA collectors.

Buy the North American Arms Mini-Master 22 Mag at MAG5 Firearms

MAG5 Firearms is a family-owned FFL in Collegeville, Pennsylvania. Order the North American Arms Mini-Master 22 Mag online and ship it to your local FFL dealer, or browse our full selection of firearms for more revolvers. For factory details, visit North American Arms.

North American Arms Mini-Master 22 Mag 4 inch revolver

Additional information

Weight 1.400 lbs
upc

744253000591

brand

North American Arms

barrel_length

4

caliber_or_gauge

22 Magnum

capacity

5

drilled_or_tapped

false

finish

Stainless

firearm_action

Single Action

frame

Steel Frame

sights

Fixed

Model

Mini-Master

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Search
×