Smith Wesson M2.0 Metal Threaded 9mm – Superb Full Size Pistol

Description

The Smith Wesson M2.0 Metal Threaded 9mm is the full-size M&P M2.0 Metal with a threaded 4.625 inch barrel, a rigid metal frame and an optic-ready slide, ready for a suppressor or compensator straight from the box.

Smith Wesson M2.0 Metal Threaded 9mm Metal Where Polymer Used to Be

The M2.0 Metal replaces the polymer frame of a standard M&P with metal, and the point is rigidity. A metal frame does not flex under recoil the way polymer does, which makes lockup more consistent and keeps the muzzle from climbing as far between shots. At around 30 ounces the pistol is heavier than its polymer sibling and shoots noticeably calmer for it.

Everything else carries over from the M2.0 generation, which is the version that fixed the original M&P trigger. The break is lighter and cleaner and the reset is both tactile and audible, which makes fast accurate follow-up shots far easier to learn.

The 18 degree grip angle is shared across the M&P line and is the reason these pistols point naturally for most shooters. A low bore axis keeps recoil pushing straight back rather than levering the muzzle up.

Threaded Barrel and Optics

The threaded barrel is the reason to choose this version over the standard gun. A 9mm suppressor on a metal-framed pistol is about as pleasant as handgun shooting gets: the frame keeps recoil flat, the can brings the report down to hearing-safe levels with subsonic ammunition, and the extra muzzle weight barely registers on a pistol this heavy.

At 4.625 inches the barrel is longer than the standard 4.25, which adds a little velocity and pushes the threads far enough forward to clear most holsters and suppressor mounts without a booster conflict.

The slide is cut for optics, a Picatinny-style rail takes a light or laser, and the flat-face trigger gives a consistent finger reference. Four interchangeable palmswell inserts adjust grip circumference and trigger reach, and the takedown lever and sear deactivation system let you strip the pistol without pulling the trigger.

Specifications

• Manufacturer part number: 14162
• Caliber: 9mm Luger
• Barrel: 4.625 in. threaded, 1 in 10 twist
• Frame: metal
• Frame size: full size
• Optics: slide cut for optics
• Trigger: M2.0 flat-face with enhanced sear
• Controls: wide slide stop, reversible magazine release
• Rail: Picatinny-style
• Grip angle: 18 degrees
• Grip: four interchangeable palmswell inserts in S, M, ML and L
• Disassembly: takedown lever and sear deactivation, no trigger pull required
• Weight: 30 oz
• UPC: 022188897593

Why Buyers Choose the Smith Wesson M2.0 Metal Threaded 9mm

A factory threaded barrel saves buying an aftermarket one and wondering whether it will shoot as well as the original.

A metal frame flattens recoil more than any other single feature on a striker-fired pistol, and it pairs particularly well with a suppressor because the added muzzle weight is less noticeable.

An optic cut and an accessory rail mean the pistol takes a red dot and a light with no milling and no adapters.

Being able to disassemble without pulling the trigger removes the most common cause of negligent discharges during cleaning.

Who Should Buy It

The Smith Wesson M2.0 Metal Threaded 9mm suits suppressor owners who want a host that shoots flat and needs no barrel swap, competitors who want a compensator, and anyone who prefers the handling of a metal-framed pistol. Remember that a pistol suppressor needs a tilting-barrel booster to cycle reliably, so budget for one if you do not already have it.

Learn more from Smith and Wesson, or browse the rest of our firearms selection.

Every firearm we list ships to your chosen FFL and is transferred there after a background check.