Description
The Trijicon Suppressor Sights Smith Wesson MP set is Trijicon’s suppressor and optic height three dot tritium sight set for the Smith and Wesson M&P family. It fits the original M&P, the M2.0, and the SD9 VE and SD40 VE, excluding the Shield and C.O.R.E. series. Taller blades let the irons clear a suppressor or appear inside a mounted red dot window.
What Suppressor Height Actually Buys You
Factory pistol sights sit low because nothing is supposed to be in the way. Mount a suppressor and the can blocks the view. Mill the slide for a red dot and the aiming point moves above the irons entirely. Both problems have the same answer, which is a taller front and rear blade.
Overall front blade height on the Trijicon Suppressor Sights Smith Wesson MP set measures four hundred and forty five thousandths of an inch and the rear measures four hundred and forty four. That is tall enough to show up inside the glass of most pistol optics, so a dead battery or a rain streaked lens still leaves you with a usable aiming reference.
Three White Dots, Front And Rear
This configuration uses white painted rings around the tritium lamps at both the front and the rear. That is the classic three dot layout most shooters learned on, and it is fast for anyone whose training built around stacking three dots in a row before pressing the trigger.
The alternative, a blacked out rear, forces the eye onto the front sight and nothing else. Neither is objectively better. If you shoot a three dot picture well, the Trijicon Suppressor Sights Smith Wesson MP set keeps you on familiar ground rather than making you relearn a sight picture on a defensive pistol.
Green Tritium At Both Ends
Both lamps glow green. Tritium is self powered, so there is no battery to replace, no switch to remember and no charging under a flashlight before the sights will work. It glows at the same brightness at three in the morning as it does after a week in a safe.
Trijicon seals each lamp in an aluminium cylinder, cushions it in silicone rubber, and caps it with a sapphire jewel that spreads the light evenly while shielding the lamp from solvents and punctures. That construction is the reason the Trijicon Suppressor Sights Smith Wesson MP set survives years of cleaning and hard recoil without going dark.
Trijicon Suppressor Sights Smith Wesson MP Specifications
- Fits: Smith & Wesson M&P, M&P M2.0, SD9 VE and SD40 VE
- Does Not Fit: M&P Shield and C.O.R.E. series
- Front Lamp Color: Green tritium
- Rear Lamp Color: Green tritium
- Front Paint Color: White
- Rear Paint Color: White
- Front Blade Width: 0.144 in. (3.65mm)
- Front Blade Height: 0.378 in. (9.6mm)
- Overall Front Blade Height: 0.445 in. (11.3mm)
- Rear Notch Style: Square notch
- Rear Notch Width: 0.15 in. (3.8mm)
- Rear Blade Height: 0.353 in. (8.96mm)
- Overall Rear Height: 0.444 in. (11.27mm)
- Manufacturer Part Number: SA237-C-600900
Notch Width And Sight Picture
The front blade is one hundred and forty four thousandths wide inside a rear notch of one hundred and fifty thousandths. Six thousandths of light on each side is a tight picture, which favours precision over speed and rewards a shooter who indexes the gun consistently.
If you shoot mostly at close range under time pressure you may prefer a wider notch from another maker. If you want the same sight to hold a five inch group at twenty five yards and still be visible in the dark, the Trijicon Suppressor Sights Smith Wesson MP set is built for that balance.
Why Shooters Choose The Trijicon Suppressor Sights Smith Wesson MP Set
- Suppressor and optic height blades that co witness through most pistol red dots
- Green tritium front and rear with no batteries to change
- Familiar three white dot sight picture
- Sapphire jewel capped lamps in aluminium cylinders, cushioned in silicone
- Square rear notch measuring 0.15 in. across
- Covers the M&P, M2.0, SD9 VE and SD40 VE in one part number
Fit, Installation And What Will Not Work
Check your model before ordering. The Shield and the C.O.R.E. series are excluded, and a set cut for a different dovetail will either not seat or will not regulate to point of aim. The SD9 VE and SD40 VE are included, which is useful because sight options for those pistols are thinner on the ground.
Installation wants a sight pusher for the rear dovetail and a proper punch and thread locker for the front. A slipped punch leaves a permanent mark on the slide and a canted blade will never shoot straight, so if you do not own the tools, pay a gunsmith to fit the Trijicon Suppressor Sights Smith Wesson MP set properly.
Who The Trijicon Suppressor Sights Smith Wesson MP Set Is Built For
Anyone running a suppressor on an M&P needs taller irons to see past the can. Anyone adding a red dot to a milled slide wants backup irons that appear in the window rather than below it. And plenty of shooters fit these simply because a taller sight is easier to pick up fast, with no optic involved at all.
Home defence and duty users get tritium that works in a dark house without a light. If you are comparing sight options, browse the rest of our optics and sights and read the manufacturer specification page for the complete fit list before ordering.
MAG5 Firearms is a family owned FFL dealer in Collegeville, Pennsylvania. Every Trijicon Suppressor Sights Smith Wesson MP set we list is a genuine Trijicon item sourced through authorized channels and covered by the manufacturer warranty. If you are unsure whether your pistol is on the fit list, reach out before you order and we will give you an honest answer.
Ordering The Trijicon Suppressor Sights Smith Wesson MP Set
The Trijicon Suppressor Sights Smith Wesson MP set ships as a matched front and rear pair under one part number, so there is nothing else to order alongside it. Sights are not returnable once installed, which is the practical reason to confirm the fit list and your preferred sight picture before the pusher touches the dovetail.
Reviews
There are no reviews yet.