Springfield SAINT Victor 308 16 Inch – Superb V2 AR-10 Rifle Black

Description

The Springfield SAINT Victor 308 16 Inch is what an AR-10 looks like when the goal is to carry it rather than shoot it off a bench all day. At 7 pounds 11 ounces bare it weighs less than plenty of 5.56 carbines, and it gets there through a continuous taper barrel and a slim free float handguard rather than by thinning out the parts that matter. This is the ten round configuration for states that restrict magazine capacity.

What You Get With The Springfield SAINT Victor 308 16 Inch

The barrel is 16 inches of CMV steel with a continuous taper profile and a nitride finish inside and out, cut with a 1:10 twist and threaded 5/8×24 behind a four prong flash hider. Continuous taper is the important detail. Rather than stepping the contour down at fixed points, the barrel thins gradually from chamber to muzzle, which sheds weight while keeping stiffness where the pressure actually is on the Springfield SAINT Victor 308 16 Inch.

Gas is direct impingement on an intermediate length system with a taper pinned gas block. Intermediate length is the right dwell for a 16 inch 308, and taper pinning means the block is not going to shift under a handguard the way a set screw block eventually can.

The handguard is Springfield patented Triple-Lock aluminium free float unit with a full length top rail, M-Lok slots and integrated QD sockets. A free float handguard keeps anything you clamp to it off the barrel, which is the difference between a rifle that holds zero with a bipod and one that does not.

Controls And Furniture On The Springfield SAINT Victor 308 16 Inch

Springfield fits a Radian Raptor-LT ambidextrous charging handle as standard, along with a 45 degree ambi safety that uses a short throw lever on the right side so it does not dig into your trigger finger. Between those and the QD receiver end plate, running the Springfield SAINT Victor 308 16 Inch from either shoulder needs no parts and no gunsmithing.

The trigger is a nickel boron trigger on a flat GI shoe. It is not a two stage match unit and Springfield does not pretend otherwise, but the nickel boron coating makes the engagement surfaces noticeably smoother than a bare mil-spec trigger, and the flat shoe gives you a consistent finger position. Anyone who wants more can drop in a cassette trigger later.

Furniture is B5 Systems throughout, with an Enhanced SOPMOD stock and a BCMGUNFIGHTER Mod 3 grip, and the buffer is a carbine H2 heavy tungsten unit that takes some of the sharpness out of the 308 impulse. Overall length runs 34.5 to 37.75 inches depending on where you set the stock.

Springfield SAINT Victor 308 16 Inch Specifications

• Caliber: 308 Winchester (7.62x51mm NATO)
• Barrel: 16 inch CMV, continuous taper, nitride finish, 1:10 twist
• Muzzle: 5/8×24 threads with four prong flash hider
• Gas system: Direct impingement, intermediate length, taper pinned gas block
• Bolt carrier: Enhanced 308 BCG, 9310 steel bolt, HPT and MPI tested, nitride
• Handguard: Patented Triple-Lock aluminium free float, full length top rail, M-Lok, QD
• Receivers: Forged 7075 T6 aluminium, Type III hardcoat anodised
• Upper: Forward assist
• Lower: Accu-Tite tension system
• Charging handle: Radian Raptor-LT ambidextrous
• Safety: 45 degree ambidextrous, short throw right side
• Trigger: Nickel boron coated flat GI
• Stock: B5 Systems Enhanced SOPMOD
• Grip: BCMGUNFIGHTER Mod 3
• Buffer: Carbine H2 heavy tungsten
• Sights: Low profile aluminium flip up front and rear
• Overall length: 34.5 to 37.75 inches
• Weight: 7 pounds 11 ounces
• Magazine: One ten round Magpul PMAG Gen M3
• Model number: STV916308BLC-V2-B5
• UPC: 706397000493

Flip up iron sights are fitted front and rear, so the Springfield SAINT Victor 308 16 Inch is usable straight out of the case before you spend anything on optics.

Why Buyers Choose The Springfield SAINT Victor 308 16 Inch

The case for a SAINT Victor AR-10 rifle over a 5.56 carbine is simple: more bullet weight and more energy on target from a rifle that is barely heavier. For deer, hogs and anything else where 5.56 is marginal or not legal, the Springfield SAINT Victor 308 16 Inch does the job without asking you to carry a bolt gun.

Springfield also fitted the parts most people replace anyway. The ambi charging handle, the ambi safety, the free float rail and the B5 furniture are all things buyers routinely upgrade on cheaper rifles, and on the Springfield SAINT Victor 308 16 Inch they are simply standard.

Now the honest part. A 16 inch 308 is loud, and the muzzle blast off a flash hider at that length gets attention on an indoor range. The AR-10 platform has never standardised the way AR-15s did, so magazines, handguards and buffer parts are pattern specific rather than universal, and 308 ammunition costs roughly twice what 5.56 does, which shows up quickly in practice sessions.

The trigger is the one component on the Springfield SAINT Victor 308 16 Inch most owners eventually change. It is perfectly serviceable for field shooting, but if you intend to shoot groups at distance, budget for a drop in unit.

Who Should Buy The Springfield SAINT Victor 308 16 Inch

The Springfield SAINT Victor 308 16 Inch suits the hunter who wants a semi automatic in a real hunting cartridge, or anyone building one rifle to cover deer sized game and defensive use. If you mostly punch paper at 100 yards, a 5.56 rifle will cost far less to feed. If you want a precision rifle for distance work, a 20 inch barrel and a better trigger will serve you further. This one is built for the middle ground, and it is a comfortable place to be.

Learn more about this AR-10 rifle from the manufacturer, or see more firearms available at MAG5 Firearms.