Description
The Migra Staxd 12 GA Steel 2-3 Shot is a 3 inch, 1-1/4 ounce waterfowl load that combines two shot sizes in one shell: larger #2 steel pellets for energy and penetration, and smaller #3 steel pellets for pattern density. Migra rates the load at 1,515 fps, and each box holds 25 rounds.
How the Migra Staxd 12 GA Steel 2-3 Shot Stacked Load Works
Stacked steel shotshells load different shot sizes in layers rather than mixing them at random. Migra says it uses specific components at exact percentages so the stack patterns consistently and produces a shorter shot string, meaning more pellets arrive at the target at nearly the same moment. The idea is simple: the #2 pellets bring retained energy for bigger birds and longer shots, while the #3 pellets fill in the pattern for clean hits on the head and neck.
Migra builds its shells in small batches with its own wads, powders and hull designs, and it states there are no fillers in the shot column. The high-brass hull and 1,515 fps velocity put this load at the faster end of standard steel waterfowl ammo, which helps offset the lighter weight of steel compared with lead or bismuth.
Because steel is non-toxic, the Migra Staxd 12 GA Steel 2-3 Shot is legal for waterfowl hunting where federal and state rules require non-toxic shot. Always double-check local regulations and any shot-size limits for the area you hunt.
Using the Migra Staxd 12 GA Steel 2-3 Shot in the Field
This is a 3 inch 12 gauge steel shot load, so it requires a shotgun chambered for 3 inch or 3-1/2 inch shells. Do not fire it in a 2-3/4 inch chamber. Check the barrel stamp before heading out.
Choke choice matters with steel. Steel pellets do not deform the way lead does, so they pattern tighter through the same constriction. Many hunters get better results with improved cylinder or modified chokes rated for steel, and older fixed full-choke barrels or chokes not marked for steel should not be used with steel shot. Pattern the Migra Staxd 12 GA Steel 2-3 Shot on paper at 30 and 40 yards to see how it prints in your gun.
As duck and goose loads go, a 1,515 fps, 1-1/4 ounce shell produces noticeable recoil, especially across a long morning in the blind. A good recoil pad and a gas-operated semi-auto make a real difference. Steel also ricochets more readily than lead off water, ice and hard surfaces, so be deliberate about your shot angles and your hunting partners.
Migra Staxd 12 GA Steel 2-3 Shot Specifications
- Brand: Migra Ammunitions
- Line: Staxd Stack Load Steel
- Model: M-12AS2-3
- Gauge: 12 GA
- Shell Length: 3 inch
- Payload: 1-1/4 oz steel
- Shot Size: #2 and #3 stacked
- Velocity: 1,515 fps (manufacturer rating)
- Hull: high brass
- Rounds per Box: 25
- UPC: 850081504023
Why Hunters Choose the Migra Staxd 12 GA Steel 2-3 Shot
The Migra Staxd 12 GA Steel 2-3 Shot is a good fit for hunters who see a mix of ducks and geese in the same spread, or who want one box that can handle decoying birds and slightly longer passing shots. The #2 and #3 pairing is a common all-around choice that balances energy and pellet count better than a single shot size.
The trade-offs are cost and specialization. Premium stacked waterfowl ammo usually costs more than bulk steel, and a heavy 3 inch load is more than you need for close teal or early-season shooting. If most of your shots are inside 30 yards, a lighter #3 or #4 load may be kinder on the shoulder and the wallet.
Find more loads in the MAG5 Firearms ammunition selection, including other Migra stack combinations such as #2 and #4. Full specifications are available from Migra Ammunitions.
Who it is for: waterfowl hunters with a 3 inch or 3-1/2 inch 12 gauge who want a fast, dense stacked steel load for mixed duck and goose hunting. Always follow federal, state and local waterfowl regulations and store ammunition in a cool, dry place when not using the Migra Staxd 12 GA Steel 2-3 Shot.
Reviews
There are no reviews yet.