Hi-Point JCP 40 Gen2 Threaded Pistol – Rugged 5.25″ 40 S&W, 10+1

Description

The Hi-Point JCP 40 Gen2 Threaded Pistol is the second-generation version of Hi-Point’s full-size 40 S&W pistol, fitted with an extended threaded barrel.

Hi-Point JCP 40 Gen2 Threaded Pistol Overview

Lipsey’s lists this JCP40G2 with a 5.25-inch threaded barrel, an 8.5-inch overall length and a 10-round magazine. Hi-Point’s general JCP 40 Gen2 spec sheet shows a 4.5-inch barrel, a 7.75-inch length and a weight of 43.2 ounces, while Lipsey’s lists 35 ounces, so treat the weight as approximate. Gen2 is Hi-Point’s current version of the J-series frame, and like every Hi-Point it is built for function and price rather than refinement.

Blowback Design and Build

The JCP 40 uses a straight blowback action with a fixed barrel, a high-impact polymer frame and a heavy slide. There is no locking mechanism: slide mass and the recoil spring hold the action closed until pressure drops, which keeps the design simple and inexpensive but makes the pistol heavier and thicker than locked-breech guns of similar size. The fixed barrel helps practical accuracy, and Hi-Point builds it with American-made parts and assembly and backs it with a lifetime warranty that follows the gun to later owners.

Sights, Safety and Controls

The JCP uses three-dot sights with a fully adjustable rear, and Hi-Point includes an extra rear peep sight in the box. A manual thumb safety, a magazine disconnect safety and a slide that locks open after the last round are standard, and Hi-Point rates the pistol for +P ammunition. The magazine release sits behind the trigger guard, and the blowback slide rewards a firm grip for reliable cycling.

Threaded Barrel Considerations

The extended barrel is threaded so you can fit a thread protector, a compensator or a suppressor if you already own one. Before you buy a muzzle device, confirm the thread pitch with Hi-Point and check that it clears the slide. A suppressor is an NFA item that requires an approved ATF Form 4 and must be legal in your state, and a few states restrict threaded barrels on semi-automatic pistols entirely. Keep the protector on when the barrel is bare.

Recoil, Size and Ammunition

40 S&W is snappier than 9mm, but a pistol this heavy absorbs much of that, so felt recoil is manageable. Police trade-in demand keeps practice ammunition easy to find, though it usually costs more than 9mm. Hi-Point says the 10-round magazine interchanges with its 4095TS carbine, so a matched pistol and carbine can share magazines and ammunition. At about 8.5 inches long with the threaded barrel, this is a home and range pistol rather than a carry gun.

Honest Caveats

Hi-Point pistols trade refinement for price. They are heavy and thick for their size, the trigger is long and gritty, and holster and magazine choices are far narrower than for mainstream polymer pistols. Takedown takes a punch rather than a lever, resale value is modest, and a weak grip can cause stoppages, so practice with a firm hold. Threaded barrels also add length, which makes holster selection even narrower.

State Laws and Ownership

Pennsylvania buyers 21 and older can purchase this pistol through a dealer, and carrying it concealed or in a vehicle generally requires a License to Carry Firearms. Other states are stricter: some keep a roster of approved handguns, some cap magazine capacity, some restrict threaded barrels on pistols, and many require a purchase permit. Check your state and local rules before ordering.

Specifications

• Model: JCP40G2
• Caliber: 40 S&W
• Barrel: 5.25 in., threaded (per Lipsey’s)
• Capacity: 10+1
• Weight: about 43 oz. per Hi-Point (Lipsey’s lists 35 oz.)
• Overall length: 8.5 in. (per Lipsey’s)
• Sights: 3-dot, fully adjustable rear
• Frame: high-impact polymer; slide: black powder coat
• Safeties: manual thumb safety, magazine disconnect

Before You Buy

Federal law requires this pistol to ship to a licensed FFL dealer, where you complete ATF Form 4473 and pass a background check. You must be 21 or older to buy a handgun from a dealer, and some states add permits, waiting periods or roster restrictions. Confirm your local rules and your dealer’s transfer fee before ordering.

Who It Is For

The Hi-Point JCP 40 Gen2 Threaded Pistol is a great fit for 40 S&W shooters on a budget, owners of the 40 S&W carbine who want a matching pistol, and anyone wanting an inexpensive home pistol with a threaded muzzle.

Buy the Hi-Point JCP 40 Gen2 Threaded Pistol at MAG5 Firearms

MAG5 Firearms is a family-owned FFL in Collegeville, Pennsylvania. Order the Hi-Point JCP 40 Gen2 Threaded Pistol online and ship it to your local FFL dealer, or browse our full selection of firearms for more pistols. For factory details, visit Hi-Point Firearms.