Description
A-Zoom 308 Winchester Snap Caps are machined aluminum dummy rounds cut to 308 Winchester dimensions, two to a pack. Two is enough for trigger work, chamber checks and letting a striker down safely, which covers most of what a snap cap is actually for.
How A-Zoom 308 Winchester Snap Caps Are Built
Each round is CNC machined from solid aluminum billet to full cartridge dimensions and hard anodized red. One piece, no separate case head, no plastic body. Nothing shears off and leaves a case body stuck in the chamber, which is the failure mode that makes cheaper dummies more trouble than they save.
The primer end carries a proprietary polymer cushion instead of a live primer, rated by A-Zoom past three thousand strikes. It slows the firing pin roughly the way a real primer does rather than letting it stop hard against the bolt face.
The red anodizing makes A-Zoom 308 Winchester Snap Caps obviously inert at a glance, which matters when live 308 or 7.62 NATO is sitting on the same bench.
Where Two Rounds Earn Their Keep
Trigger and safety checks are the primary use. Confirming sear engagement after a trigger swap, verifying the safety blocks the sear and testing that the rifle does not fire when the bolt slams closed all want an inert round in the chamber rather than an empty one.
Chamber and extractor confirmation is the other. Making sure a round seats fully and that the extractor grabs the rim is a sensible bench check after barrel or bolt work on a precision rifle, and A-Zoom 308 Winchester Snap Caps do it without spending ammunition.
Handloaders get a third use. Comparing a machined dummy against your own loaded rounds is a quick check on overall length and magazine fit, and cycling one through the action shows whether a long-seated high BC bullet is going to bind before you build a batch.
- Caliber: 308 Winchester (also serves 7.62x51mm NATO chambers)
- Quantity: 2 per pack
- Construction: CNC machined solid aluminum, hard anodized red
- Primer: proprietary polymer dead cap, rated 3,000+ dry fires
- Design: one piece, no case head to separate
- Uses: dry fire practice, trigger and safety checks, chamber and extractor tests, action release
- Made in the USA
- Manufacturer item: PA12228 / UPC 666692122286
Field Notes
Precision rifle owners get real value here. A 308 built for accuracy usually wears an adjustable trigger that gets fiddled with, and every adjustment deserves a function check with something in the chamber.
Storing the rifle with the striker down on a dummy round keeps the mainspring relaxed without leaving a cocked action in the safe. A-Zoom 308 Winchester Snap Caps are cheap next to a replacement firing pin.
The polymer cushion is a wear item. When the face is visibly cratered and stops rebounding, retire that round rather than continuing to strike a dead cushion.
Want enough to fill a magazine? The same caliber is stocked as A-Zoom 308 Win Snap Caps in a blue aluminum ten pack, and the line covers 243 Winchester as well. Construction details are published by A-Zoom.
For bolt gun owners and AR-10 builders who just need a pair, A-Zoom 308 Winchester Snap Caps are the right buy. MAG5 Firearms stocks them as manufacturer item PA12228 in the two pack.
Reviews
There are no reviews yet.