Description
A-Zoom 10 Gauge Snap Caps are solid aluminum dummy shells in 10 gauge, two to a pack. Ten gauge guns are a small and mostly older population, which means a broken firing pin is a specialist repair rather than a parts order, and that is the whole argument for owning a pair of these.
How A-Zoom 10 Gauge Snap Caps Are Built
Each shell is CNC machined from solid aluminum billet to 10 gauge dimensions and hard anodized. No plastic hull, no crimped end to split, nothing that swells or deforms after a few hundred cycles through an action.
The rim end carries a proprietary polymer cushion in place of a primer, rated by A-Zoom past three thousand strikes. Ten gauge guns tend to use heavy hammers and long firing pins, and that cushion is what keeps the pin from taking the full stop each time you let the hammer down.
Because A-Zoom 10 Gauge Snap Caps are dimensionally correct, they chamber and extract like real shells. On a gun this size, where a mis-sized dummy would sit loose and tell you nothing, that accuracy matters.
Where Two Shells Earn Their Keep
Break actions and doubles are the primary market. Letting the hammers down on empty chambers is exactly what breaks slender rebounding pins, and a pair of A-Zoom 10 Gauge Snap Caps turns that into a safe routine you can do every time the gun goes back in the cabinet.
Ejector and extractor checking is the second job. Opening the action on dummy shells shows whether both barrels are lifting or throwing shells the way they should, which is worth confirming after any work on the gun.
There is a handling benefit as well. A ten gauge is a heavy gun with a long swing, and rehearsing mount and trigger press with an inert shell chambered lets you complete the whole motion rather than stopping short of the shot.
- Gauge: 10 gauge
- Quantity: 2 per pack
- Construction: CNC machined solid aluminum, hard anodized
- Primer: proprietary polymer dead cap, rated 3,000+ dry fires
- Design: one piece, no plastic hull to split or swell
- Uses: dry fire practice, hammer release, ejector and extractor checks, safe storage
- Made in the USA
- Manufacturer item: PA12210 / UPC 666692122101
Field Notes
Goose and turkey guns spend most of the year in storage, and storing a break action with the hammers down on a snap cap rather than an empty chamber keeps the springs relaxed and the pins unstressed through the off season.
Semi-auto ten gauges benefit too. Hand cycling A-Zoom 10 Gauge Snap Caps through the magazine and carrier confirms the gun still feeds after a long layup without burning expensive ammunition to find out.
The polymer cushion is a consumable. When the face is deeply cratered and stops rebounding, retire that shell rather than continuing to strike a dead cushion.
Shooting smaller bores as well? The line covers 12 gauge in a five pack and 410 bore in a two pack. Construction details are published by A-Zoom.
For waterfowlers and turkey hunters running a 10 gauge, A-Zoom 10 Gauge Snap Caps are cheap insurance on a gun that is not easy to get parts for. MAG5 Firearms stocks them as manufacturer item PA12210 in the two pack.
Reviews
There are no reviews yet.