Trijicon Suppressor Sights Sig Sauer Solid 3 Dot Set

Description

The Trijicon Suppressor Sights Sig Sauer set is Trijicon SG201-C-600907, cut for Sig Sauer pistols chambered in 9mm and .357 SIG and built tall enough to work with a slide mounted optic or a suppressor. It covers a lot of ground in the Sig line, from the old alloy framed P226 and P228 through to the modular P320 that replaced them.

Which Sig Pistols the Trijicon Suppressor Sights Sig Sauer Set Fits

Trijicon lists fitment as Sig models calibrated for 9mm and .357 SIG, specifically including the P225, P226, P228, P239 and P320. That covers the classic double action Sigs and the striker fired P320 family, which is unusual for a single part number. It explicitly excludes the P938 and the P365, both of which use their own much smaller dovetails. If you are shopping for a micro compact, this is not the set you want.

Height is the reason to choose these over the standard set. A slide mounted optic raises the aiming reference roughly half an inch above the slide, and factory height irons vanish below the window. The Trijicon Suppressor Sights Sig Sauer set sits tall enough to co-witness with a red dot, which means the front post and rear notch land inside the optic window and are there waiting if the dot goes dark. The same height clears the body of a typical pistol suppressor.

The lamps are the standard Trijicon build. Green tritium three dot sights with a white outline ring around each one, a sapphire jewel cap spreading the glow evenly and protecting the glass from solvent and grit, an aluminium cylinder around the assembly and a silicone cushion beneath it to absorb slide shock instead of passing it into the tritium.

Trijicon Suppressor Sights Sig Sauer Specifications

Trijicon retail on the Trijicon Suppressor Sights Sig Sauer set is 160 dollars, the usual premium over a standard height set, and it buys you height rather than better lamps. Worth knowing if you are fitting an old P226 with no optic on it: you would be better served by the standard height version. On a P320 with a milled slide, or any Sig wearing a can, the tall sights are the whole point.

• Trijicon model SG201-C-600907, suppressor and optic height set
• Fits Sig Sauer 9mm and .357 SIG models
• Includes P225, P226, P228, P239 and P320
• Does not fit the P938 or the P365
• Front: white outline with green tritium lamp, tall post
• Rear: white outline with green tritium lamp, tall notch
• Purpose: co-witness with a red dot or clear a suppressor
• Lamp protection: sapphire jewel cap, aluminium cylinder, silicone cushion
• Warranty: 12 years on the tritium lamps
• UPC 719307213319

Honest Notes on the Trijicon Suppressor Sights Sig Sauer Set

Check your slide before ordering. Sig has used more than one rear dovetail across the P226 production run, and older European built guns are not always identical to later American ones. The P320 is consistent, the legacy guns less so. If your pistol is old or has been refinished, it is worth measuring or asking a gunsmith rather than assuming the Trijicon Suppressor Sights Sig Sauer set drops straight in.

Tall sights on a pistol with nothing mounted are a step backwards. Higher sight picture, more of the target hidden behind a taller front post, no benefit. If there is no optic and no suppressor in your plan, buy standard height and keep the money.

Holster clearance is the other practical issue, especially for the P320 where the aftermarket is enormous and the quality varies. Tall sights ride higher in the sight channel and a tight kydex holster can drag on the front post. And as with every tritium sight ever made, brightness halves at roughly twelve years, which is why Trijicon warrants the lamps for twelve. Have a gunsmith press the Trijicon Suppressor Sights Sig Sauer set in, then confirm zero on paper, because sight height shifts point of impact at distance.

Every Trijicon Suppressor Sights Sig Sauer set we ship is current Trijicon production in the sealed factory package with hardware and warranty card. MAG5 Firearms is a family run FFL dealer in Collegeville, Pennsylvania, and pistol sights ship direct to your door with no transfer needed.

See more pistol sights and red dots at MAG5 Firearms, or check the Trijicon SG201-C-600907 fitment list from the manufacturer.