Trijicon Fiber Replacement Red 3 Pack Reliable Rod Kit

Description

The Trijicon Fiber Replacement Red 3 Pack is a set of three red replacement fiber optic rods for Trijicon iron sights, part number AC50008. Fiber rods are a consumable. They are the one part of a fiber sight that will eventually need attention, and buying the correct factory material is considerably cheaper than replacing the whole blade.

Why Fiber Rods Need Replacing

A fiber optic rod is a thin filament of light transmitting polymer. It gathers ambient light along its length and concentrates it at the shooter’s end, which is what makes a fiber front sight so much brighter than paint in daylight. The same thinness that makes it work is what makes it vulnerable.

Rods crack from impact, shear off against a rough holster mouth, or dull and yellow after long exposure to ultraviolet light and cleaning solvent. None of that is a defect. It is wear, and having a Trijicon Fiber Replacement Red 3 Pack in the range bag turns a dead sight into a five minute job rather than a new parts order.

Three Rods, Not One

Trijicon sells these in threes for a practical reason. You will damage one while fitting it, you will want a spare for the bag, and if you run more than one fiber sighted pistol the odds of needing a second rod inside a season are good.

Red is the colour Trijicon fits to the front blade on its fiber sight sets, with green at the rear. If your front rod is the one that broke, the Trijicon Fiber Replacement Red 3 Pack is the pack you want. If a rear rod went, order the green pack instead so the colour separation between front and rear is preserved.

Why Colour Separation Matters

The reason a fiber sight set uses two colours is not decoration. Under time pressure the eye needs to know instantly which glowing point is the front sight. Two identical dots force a judgement about position. A red point and a green point do not.

Fitting a green rod to a front blade because that is what was in the drawer defeats the whole arrangement. Keep a Trijicon Fiber Replacement Red 3 Pack and a green pack together, and replace like with like so the sight picture you trained on is the sight picture you get.

Trijicon Fiber Replacement Red 3 Pack Details

• Product: Trijicon iron sight replacement fiber optic rod
• Colour: Red
• Quantity: 3 rods per pack
• Application: Trijicon fiber optic iron sight front blades
• Manufacturer Part Number: AC50008

Fitting A Replacement Rod

The rod is trimmed slightly long, threaded through the channel in the blade, and the exposed ends are melted into small retaining heads so it cannot slide out. That last step is where most people ruin their first rod, because the heads want gentle heat held at a distance rather than a flame touched to the polymer.

Work with the sight off the pistol wherever possible, and let the rod cool fully before handling it. If you would rather not do it at all, any gunsmith who fits sights will replace a rod from a Trijicon Fiber Replacement Red 3 Pack in a few minutes, and the pack gives them spares to work with.

Why Shooters Keep A Pack On Hand

• Factory Trijicon fiber material, not a generic substitute
• Three rods per pack, so you have spares after the first fitting
• Keeps the red front and green rear colour separation intact
• Far cheaper than replacing a complete sight blade
• Stores flat in a range bag or a cleaning kit

Making Rods Last Longer

Most rod failures are avoidable. A holster with a rough or sharp mouth will saw at the front sight every time the pistol is drawn and reholstered, and a few hundred repetitions is enough to damage a rod. A smooth kydex mouth or a properly boned leather holster costs a rod nothing.

Solvent is the other culprit. Aggressive bore cleaners and carburettor style degreasers attack the polymer. Wipe the blade rather than soaking it, and keep sprays off the sights entirely. Doing both will usually mean a Trijicon Fiber Replacement Red 3 Pack lasts through several years of shooting rather than a single season.

Which Sights These Fit

These rods are cut for Trijicon fiber optic iron sights, including the fiber sight sets built for Glock, Smith and Wesson and Springfield pistols. They are not intended for fiber optic scopes or for another manufacturer’s sights, which use their own diameters and channel lengths.

If you are not certain which rod your sight takes, measure the old one before ordering or tell us the sight part number and we will check. A Trijicon Fiber Replacement Red 3 Pack is inexpensive, but fitting the wrong diameter wastes the pack and the afternoon.

Ordering

If you are looking at fiber sights rather than spares, browse the rest of our optics and sights and read the manufacturer product page for the current specification.

MAG5 Firearms is a family owned FFL dealer in Collegeville, Pennsylvania. Every Trijicon Fiber Replacement Red 3 Pack we list is a genuine Trijicon item sourced through authorized channels. If you are unsure whether your sight takes the red front rod or the green rear rod, reach out before you order and we will give you an honest answer.

Keeping A Trijicon Fiber Replacement Red 3 Pack In The Range Bag

A broken front rod turns a fast sight into a black blade, usually on the morning of a match or the first day of a season. A Trijicon Fiber Replacement Red 3 Pack costs very little, takes up no room and removes that problem entirely. Shooters who run fiber sights on more than one pistol generally keep one pack of each colour with the cleaning kit rather than ordering after something breaks.