Trijicon DI Night Sights Springfield XD Mod 2 Superb

Description

The Trijicon DI Night Sights Springfield XD set fits the Springfield Armory XD, XD-M and XD Mod. 2. DI stands for dual illuminated, and it means the front sight carries two light sources at once: a tritium lamp that glows in the dark and a fiber optic rod that is far brighter than paint in daylight.

Two Light Sources, One Aiming Point

Most sights make you choose. Tritium is superb in darkness and invisible in daylight, where you are actually looking at painted rings. Fiber optic is brilliant in daylight and completely dead in the dark. Each solves half the problem.

The Trijicon DI Night Sights Springfield XD design stacks both in the same front blade so the aiming point stays in the same place whatever the light is doing. In bright conditions the fiber does the work. As the light falls the fiber quietens and the tritium takes over, and there is no moment where you have nothing.

The Fiber Is Replaceable, Which Is Unusual

On almost every fiber optic front sight the rod is bonded permanently into the blade. Crack it, shear it on a holster mouth, or simply dislike the colour and the whole blade is scrap. Trijicon designed the DI sight around a clamped fiber held by a removable retainer instead, and that is the patent pending part of it.

So a damaged rod on the Trijicon DI Night Sights Springfield XD set is a few minutes at a bench and an inexpensive replacement pack rather than a new sight and a gunsmith visit. It also means you can change the front ring colour later if the one you chose does not suit where you shoot.

Why This Matters On An XD

Springfield’s XD line has a devoted following but a thinner aftermarket than Glock or the 1911, and good night sight options for it have historically been limited. A lot of XDs are still wearing the sights they left the factory with.

A purpose cut set like the Trijicon DI Night Sights Springfield XD pair is machined for the XD dovetails specifically rather than adapted from another pistol, and it brings a genuinely modern sight picture to a platform that does not get offered many.

Trijicon DI Night Sights Springfield XD Details

• Fits: Springfield Armory XD, XD-M and XD Mod. 2
• Front Sight: dual illuminated, tritium lamp plus interchangeable fiber optic rod
• Fiber: clamped by a removable retainer, replaceable without changing the blade
• Tritium: self powered, no batteries
• Supplied: as a front and rear set
• UPC: 719307215344

Looking After The Fiber

The fiber is the wear item on any sight of this type. Rods crack from impact, shear against a rough holster mouth, and dull with long exposure to ultraviolet light and aggressive cleaning solvent. None of that is a defect, it is simply how a thin polymer filament lives on a pistol.

Wipe the blade rather than soaking it, keep sprays off the sights, and use a holster with a smooth mouth. Do those three things and the fiber in a Trijicon DI Night Sights Springfield XD set will last years rather than a season, and when it eventually goes the replacement is cheap.

Why Shooters Choose The Trijicon DI Night Sights Springfield XD Set

• Fiber optic brightness in daylight and tritium glow after dark
• Replaceable fiber rather than a bonded rod you cannot service
• Front ring colour can be changed later with a retainer pack
• Cut for the Springfield XD dovetails specifically
• No batteries, no switches and nothing to charge

DI Or A Conventional Night Sight

If the pistol is a nightstand gun that rarely sees daylight, a plain tritium set is simpler and there is nothing to service. If it is a range and competition gun that never gets shot in the dark, a pure fiber sight is brighter still and cheaper.

The Trijicon DI Night Sights Springfield XD set is for the pistol that does both: carried or kept for defence, but also shot regularly in daylight. That is most people’s XD, which is why the dual illuminated approach has found an audience.

Confirm Your Variant

Springfield has used the XD name across a long production run and several variants. Check the pistol rather than assuming, and if it has already been to a gunsmith, measure what is fitted now rather than trusting that the factory blades are still there.

Tell us your exact model and we will confirm the Trijicon DI Night Sights Springfield XD set is right for it before anything ships. Sights are not returnable once installed, which is the practical reason to ask first rather than after.

Installation And Ordering

Both blades are dovetail fits and want a proper sight pusher rather than a punch and a hammer. If you do not own the tools, a gunsmith will fit the Trijicon DI Night Sights Springfield XD set in minutes for far less than the cost of refinishing a slide you marked.

Browse the rest of our optics and sights and read the Trijicon iron sight range for the full DI line and the replacement fiber and retainer packs.

MAG5 Firearms is a family owned FFL dealer in Collegeville, Pennsylvania. Every Trijicon DI Night Sights Springfield XD set we list is a genuine Trijicon item sourced through authorized channels and covered by the manufacturer warranty. If you are unsure whether DI or a plain tritium set suits how you use the pistol, reach out and we will give you an honest answer.