Talley X-Bolt Mount 30mm High – Superb Burnt Bronze Lightweight Alloy Rings

Description

The Talley X-Bolt Mount 30mm High (Talley item HC750735) is a lightweight one-piece ring and base set for the Browning X-Bolt, sized for 30mm scope tubes at high height. It fits both short and long action X-Bolt rifles, has 0 MOA of cant, and wears a Burnt Bronze finish that matches Browning Hells Canyon models.

Talley X-Bolt Mount 30mm High Overview

Thirty millimeter tubes are now the most common size on hunting and long-range scopes, because the larger tube allows more internal adjustment and often a sturdier erector system. This Talley set gives those scopes a direct, rigid connection to the X-Bolt receiver. Each ring and its base are machined as one piece from aluminum alloy, so there is no ring-to-base joint to loosen. That makes for fast installation and a clean, low-profile look.

Matched to the Hells Canyon Finish

Browning finishes its Hells Canyon rifles in a distinctive Burnt Bronze Cerakote. A black mount on one of those rifles stands out; this set blends in. If you own an X-Bolt Hells Canyon Speed, Hells Canyon Long Range or similar model, this is the color-matched way to mount a 30mm scope.

When High Height Makes Sense

Many modern 30mm hunting scopes use 50mm or 56mm objective lenses and tall elevation turrets. High rings lift the scope enough to clear the barrel and keep the eyepiece away from the bolt handle. If your scope has a 40 to 44mm objective, check whether the medium version clears first, since a lower mount gives a more natural head position on the stock.

Installation Tips

Clean the receiver screw holes and apply medium thread locker only to the base screws. Seat the rings, rest the scope in the lower halves, set eye relief, and level the reticle.

Tighten the cap screws in a crisscross pattern with a torque driver, staying within the scope maker limit, and check that the gaps are even. Cycle the bolt fully to confirm clearance before shooting.

Strength Without the Weight

Talley machines these mounts from high-strength aluminum alloy and says the design offers more strength than many rival steel rings and bases at a lower weight. For a mountain hunting rifle like the X-Bolt, that weight saving helps keep the whole package light and balanced.

Choosing a 30mm Scope for the X-Bolt

A 30mm scope with a 3-15x or 4-16x zoom range and a capped or exposed elevation turret pairs well with this mount for western hunting. Look for enough elevation travel to reach your longest planned shot, and check the eyepiece length against the ring spacing so you can set proper eye relief without the scope crowding the rings.

Honest Limitations

This mount fits the Browning X-Bolt only and 30mm tubes only. It has 0 MOA of cant, so long-range shooters who need more elevation should consider a 20 MOA rail instead. Avoid over-torquing alloy rings. The Talley finish photo may show a different ring height than this high version.

Specifications

• Brand: Talley
• Model: Lightweight Alloy Scope Mount for Browning X-Bolt
• Item number: HC750735
• UPC: 810301022331
• Tube diameter: 30mm
• Height: High
• Fits: Browning X-Bolt short and long action
• Cant: 0 MOA
• Material: Aluminum alloy
• Finish: Burnt Bronze (Hells Canyon)
• Design: One-piece ring and base

Before You Buy

Confirm your rifle is a Browning X-Bolt and your scope has a 30mm tube. Scope mounts are not firearms, so no FFL transfer is needed and this ships straight to you.

Who It Is For

The Talley X-Bolt Mount 30mm High is a great fit for Hells Canyon X-Bolt owners running a 30mm scope with a large objective who want a light, color-matched mount.

Buy the Talley X-Bolt Mount 30mm High at MAG5 Firearms

MAG5 Firearms is a family-owned FFL in Collegeville, Pennsylvania. Order the Talley X-Bolt Mount 30mm High online, or browse our optics section for scopes, rings and mounts. For factory details, visit Talley Manufacturing.