Radian Ramjet SIG P365 Two Tone Superb Afterburner Comp Barrel Kit

$409.95

Radian R0876 two-tone kit for the 3.1-inch SIG P365 and P365X: a gray Radianite 416R RAMJET ported barrel plus a black AFTERBURNER micro compensator on the threadless INTRA-LOK mount. Drop-in fit, no gunsmithing.

15 in stock

SKU: 810098421072 Categories: , , Tags: , , , Brand:

Description

The Radian Ramjet SIG P365 Two Tone kit pairs a gray Radianite-coated RAMJET ported barrel with a black AFTERBURNER micro compensator, built specifically for the SIG P365. It is Radian part number R0876, and it drops into the factory slide without gunsmithing, threading, or a longer slide. The result is a flatter-shooting pistol with a two-tone look: the compensator matches a black slide while the gray barrel hood shows through the ejection port.

Radian Ramjet SIG P365 Two Tone gray ported barrel and black compensator

How the ported barrel and micro comp work together

Most pistol compensators need a threaded barrel and a comp you have to keep tight and timed. This kit skips all of that. The RAMJET barrel has ports cut near the muzzle, and the AFTERBURNER slides over the end of the barrel and locks on with Radian’s INTRA-LOK system: a tapered screw that pulls against a V-groove, so the comp centers itself on the bore every time it is tightened. There are no threads to gall and no crush washers to fiddle with.

When a round fires, gas escapes up through the barrel ports and out the top of the compensator just before the bullet leaves the muzzle. That upward jet pushes the muzzle down against the pistol’s natural flip. On a micro-compact carry pistol like the SIG P365, where muzzle rise is what slows follow-up shots, that is exactly where the Radian Ramjet SIG P365 Two Tone earns its place.

Why choose the black and gray finish

Radian offers this kit in all black, bronze, and the black and gray combination on this listing. The Radian Ramjet SIG P365 Two Tone uses a gray Radianite coating on the barrel and black Radianite on the AFTERBURNER. On a black slide the compensator blends in at the muzzle, while the gray SIG P365 barrel hood gives a subtle contrast at the ejection port. It is a quieter look than bronze. Radianite is not paint; it is a hard, low-friction coating that resists corrosion and carbon wear.

Radian Ramjet SIG P365 Two Tone specifications

  • Fitment: SIG P365 and P365X with the 3.1-inch barrel, 9mm (not the P365XL, P365-XMACRO, or P365-380)
  • Radian part number: R0876
  • UPC: 810098421072
  • Caliber: 9mm
  • Barrel: match-grade, ported, threadless muzzle, hardened 416R stainless steel
  • Compensator: stainless steel, Radianite coated
  • Finish: gray Radianite barrel, black Radianite compensator
  • Mounting: INTRA-LOK tapered screw, torqued to 15 in.-lb.
  • Maintenance: coat the barrel-to-compensator interface with heat-resistant gun oil to prevent carbon lock
  • In the box: RAMJET barrel, AFTERBURNER compensator, INTRA-LOK tapered screw, TORX bit
  • Legality: sold by Radian as legal for sale in all 50 states

SIG P365 and P365X fitment notes

This kit is cut for the 3.1-inch barrel used in the standard SIG P365 and the P365X, so anyone looking for a P365X compensator gets the same fit. It will not fit the 3.7-inch P365XL or P365-XMACRO, which have their own Radian kit, and it is a 9mm part only. Radian designed it around factory SIG slides; if your P365 wears an aftermarket slide, send us the make and model and we will confirm fit before you order.

The P365 changed concealed carry by packing ten or more rounds into a pistol this small, but the short sight radius and light slide make it lively when you shoot fast. That is where the Radian Ramjet SIG P365 Two Tone pays off: it adds only a little length at the muzzle and takes the edge off the flip. Radian also makes a Compressor guide rod for the P365 3.1 if you want to fine-tune recoil spring weight.

Installing it at the bench

Installation takes a few minutes. Remove the magazine, visually confirm the chamber is empty, and field strip the slide as the factory manual describes. Pull the recoil spring assembly and the factory barrel, put a light coat of oil on the RAMJET barrel exterior and hood, and drop it into the slide. Reinstall the recoil spring, slide the AFTERBURNER over the muzzle, and tighten the tapered screw to 15 inch-pounds with the supplied TORX bit. Reassemble, then function check before live fire. Keep the factory barrel: the Radian Ramjet SIG P365 Two Tone returns to stock just as easily.

Honest trade-offs to weigh first

A compensator is not free performance. The Radian Ramjet SIG P365 Two Tone is louder and more concussive for you and anyone beside you at the range, and shooting from a retention position close to the body puts hot gas and unburnt powder near your face and clothing. Barrel ports also add visible muzzle flash in low light. If the pistol wears a red dot, expect the lens to collect carbon faster and plan to wipe it after each range trip.

Holster fit is the other question. The AFTERBURNER adds a little length and bulk at the muzzle, so many open-bottom Kydex holsters work while closed-end or tightly molded holsters may not. Check with your holster maker before you carry. Ported barrels also bleed off some gas, so weak or very light range ammunition may not cycle as reliably; run a few hundred rounds of your carry load first. The kit is designed for factory slides and fits many aftermarket slides, but confirm with Radian before ordering for a custom slide.

Who the Radian Ramjet SIG P365 Two Tone suits

The Radian Ramjet SIG P365 Two Tone makes sense for P365 and P365X carriers who practice regularly and want flatter, faster follow-up shots from a very small pistol. It also suits anyone shopping for a SIG P365 compensator that needs no threaded barrel. It is less compelling if you rarely shoot or love your current holster. For shooters who train regularly and want faster, flatter follow-up shots, the Radian Ramjet SIG P365 Two Tone is one of the cleanest upgrades available, since it leaves the slide and sights untouched.

Buy the Radian Ramjet SIG P365 Two Tone from MAG5 Firearms

MAG5 Firearms is a family-owned FFL dealer in Collegeville, Pennsylvania. Barrels and compensators are not firearms under federal law, so this kit ships to your door without a transfer. Prefer another finish? See our all-black Radian Afterburner Ramjet for the P365. For Radian’s own documentation, visit the Radian Weapons product page. Questions about fit? Call 610-943-0010 or email [email protected] and we will help you set up the Radian Ramjet SIG P365 Two Tone with the right carry gear.

Additional information

Weight 0.000 lbs
Dimensions 0.000 × 0.000 × 0.000 in
upc

810098421072

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Search
×