Description
The Radian Ramjet Ruger RXM Bronze kit pairs a bronze Radianite-coated RAMJET ported barrel with a black AFTERBURNER micro compensator, built specifically for the Ruger RXM. It is Radian part number R0945, and it drops into the factory slide without gunsmithing, threading, or a longer slide. The result is a flatter-shooting pistol with a two-tone look: the compensator matches a black slide while the bronze barrel hood shows through the ejection port.
How the ported barrel and micro comp work together
Most pistol compensators need a threaded barrel and a comp you have to keep tight and timed. This kit skips all of that. The RAMJET barrel has ports cut near the muzzle, and the AFTERBURNER slides over the end of the barrel and locks on with Radian’s INTRA-LOK system: a tapered screw that pulls against a V-groove, so the comp centers itself on the bore every time it is tightened. There are no threads to gall and no crush washers to fiddle with.
When a round fires, gas escapes up through the barrel ports and out the top of the compensator just before the bullet leaves the muzzle. That upward jet pushes the muzzle down against the pistol’s natural flip. On a compact double-stack pistol like the Ruger RXM, where muzzle rise is what slows follow-up shots, that is exactly where the Radian Ramjet Ruger RXM Bronze earns its place.
Why choose the black and bronze finish
Radian offers this kit in all black, black and gray, and the black and bronze combination on this listing. The Radian Ramjet Ruger RXM Bronze uses a bronze Radianite coating on the barrel and black Radianite on the AFTERBURNER. On a black slide the compensator blends in at the muzzle, while the bronze Ruger RXM barrel hood gives a bold contrast at the ejection port. If you want the barrel to stand out, bronze is the most eye-catching of the three finishes. Radianite is not paint; it is a hard, low-friction coating that resists corrosion and carbon wear.
Radian Ramjet Ruger RXM Bronze specifications
- Fitment: Ruger RXM with the 4-inch barrel only (not Glock pistols)
- Radian part number: R0945
- UPC: 810098421546
- Caliber: 9mm
- Barrel: match-grade, ported, threadless muzzle, hardened 416R stainless steel
- Compensator: hardened stainless steel with angled front faces to ease holstering
- Finish: bronze Radianite barrel, black Radianite compensator
- Mounting: INTRA-LOK tapered screw, torqued to 15 in.-lb.
- Maintenance: coat the barrel-to-compensator interface with heat-resistant gun oil to prevent carbon lock
- In the box: RAMJET barrel, AFTERBURNER compensator, INTRA-LOK tapered screw, TORX bit
- Legality: sold by Radian as legal for sale in all 50 states
Ruger RXM fitment notes
This bronze kit is cut for the 4-inch Ruger RXM only. Although the RXM takes Glock 19 magazines and shares many internal parts, Radian machines a dedicated RXM barrel, so a Glock kit is not a substitute. The factory recoil spring assembly stays in place.
Bronze is the finish people notice first. On the black RXM slide, the Radian Ramjet Ruger RXM Bronze shows a bright bronze barrel hood at the ejection port with a black comp out front. If you prefer a quieter look, the same kit comes in black and gray. Either way, a red dot on the optics-ready slide will need more frequent cleaning.
Installing it at the bench
Installation takes a few minutes. Remove the magazine, visually confirm the chamber is empty, and field strip the slide as the factory manual describes. Pull the recoil spring assembly and the factory barrel, put a light coat of oil on the RAMJET barrel exterior and hood, and drop it into the slide. Reinstall the recoil spring, slide the AFTERBURNER over the muzzle, and tighten the tapered screw to 15 inch-pounds with the supplied TORX bit. Reassemble, then function check before live fire. Keep the factory barrel: the Radian Ramjet Ruger RXM Bronze returns to stock just as easily.
Honest trade-offs to weigh first
A compensator is not free performance. The Radian Ramjet Ruger RXM Bronze is louder and more concussive for you and anyone beside you at the range, and shooting from a retention position close to the body puts hot gas and unburnt powder near your face and clothing. Barrel ports also add visible muzzle flash in low light. If the pistol wears a red dot, expect the lens to collect carbon faster and plan to wipe it after each range trip.
Holster fit is the other question. The AFTERBURNER adds a little length and bulk at the muzzle, so many open-bottom Kydex holsters work while closed-end or tightly molded holsters may not. Check with your holster maker before you carry. Ported barrels also bleed off some gas, so weak or very light range ammunition may not cycle as reliably; run a few hundred rounds of your carry load first. The kit is designed for factory slides and fits many aftermarket slides, but confirm with Radian before ordering for a custom slide.
Who the Radian Ramjet Ruger RXM Bronze suits
The Radian Ramjet Ruger RXM Bronze makes sense for RXM owners who train regularly and want flatter follow-up shots with a finish that stands out. It also suits anyone shopping for a Ruger RXM compensator that needs no threaded barrel. It is less compelling if you rarely shoot or love your current holster. For shooters who train regularly and want faster, flatter follow-up shots, the Radian Ramjet Ruger RXM Bronze is one of the cleanest upgrades available, since it leaves the slide and sights untouched.
Buy the Radian Ramjet Ruger RXM Bronze from MAG5 Firearms
MAG5 Firearms is a family-owned FFL dealer in Collegeville, Pennsylvania. Barrels and compensators are not firearms under federal law, so this kit ships to your door without a transfer. Prefer another finish? See our black and gray Radian Ramjet for the RXM. For Radian’s own documentation, visit the Radian Weapons product page. Questions about fit? Call 610-943-0010 or email [email protected] and we will help you set up the Radian Ramjet Ruger RXM Bronze with the right carry gear.
Reviews
There are no reviews yet.