Description
The Radian Ramjet Glock 19 Gen 3 Bronze kit pairs a bronze Radianite-coated RAMJET ported barrel with a black AFTERBURNER micro compensator, built specifically for the Glock 19 Gen 3. It is Radian part number R0835, and it drops into the factory slide without gunsmithing, threading, or a longer slide. The result is a flatter-shooting pistol with a two-tone look: the compensator matches a black slide while the bronze barrel hood shows through the ejection port.
How the ported barrel and micro comp work together
Most pistol compensators need a threaded barrel and a comp you have to keep tight and timed. This kit skips all of that. The RAMJET barrel has ports cut near the muzzle, and the AFTERBURNER slides over the end of the barrel and locks on with Radian’s INTRA-LOK system: a tapered screw that pulls against a V-groove, so the comp centers itself on the bore every time it is tightened. There are no threads to gall and no crush washers to fiddle with.
When a round fires, gas escapes up through the barrel ports and out the top of the compensator just before the bullet leaves the muzzle. That upward jet pushes the muzzle down against the pistol’s natural flip. On a compact double-stack pistol like the Glock 19 Gen 3, where muzzle rise is what slows follow-up shots, that is exactly where the Radian Ramjet Glock 19 Gen 3 Bronze earns its place.
Why choose the black and bronze finish
Radian offers this kit in all black, black and gray, and the black and bronze combination on this listing. The Radian Ramjet Glock 19 Gen 3 Bronze uses a bronze Radianite coating on the barrel and black Radianite on the AFTERBURNER. On a black slide the compensator blends in at the muzzle, while the bronze Glock 19 Gen 3 barrel hood gives a bold contrast at the ejection port. If you want the barrel to stand out, bronze is the most eye-catching of the three finishes. Radianite is not paint; it is a hard, low-friction coating that resists corrosion and carbon wear.
Radian Ramjet Glock 19 Gen 3 Bronze specifications
- Fitment: Glock 19 Gen 3 only (not Gen 4, Gen 5, Gen 6, or G19X)
- Radian part number: R0835
- UPC: 810098420617
- Caliber: 9mm
- Barrel: match-grade, ported, threadless muzzle, hardened 416R stainless steel
- Compensator: hardened stainless steel with angled front faces to ease holstering
- Finish: bronze Radianite barrel, black Radianite compensator
- Mounting: INTRA-LOK tapered screw, torqued to 15 in.-lb.
- Maintenance: coat the barrel-to-compensator interface with heat-resistant gun oil to prevent carbon lock
- In the box: RAMJET barrel, AFTERBURNER compensator, INTRA-LOK tapered screw, TORX bit
- Legality: sold by Radian as legal for sale in all 50 states
Glock 19 Gen 3 fitment notes
This bronze kit fits the Glock 19 Gen 3 only. Radian cuts a separate barrel for each Glock generation, so it will not drop into a Gen 4, Gen 5, or G19X. A Gen 3 frame has finger grooves and no swappable backstraps, and its slide carries no generation roll mark, which is the quickest way to tell it apart from a Gen 4.
Plenty of Gen 3 G19s have seen years of carry and thousands of rounds, and the Radian Ramjet Glock 19 Gen 3 Bronze replaces a tired factory barrel with a new match-grade one while adding the comp. The bronze hood at the ejection port is a clear visual cue that the pistol has been upgraded, while the black comp keeps the muzzle looking close to factory.
Installing it at the bench
Installation takes a few minutes. Remove the magazine, visually confirm the chamber is empty, and field strip the slide as the factory manual describes. Pull the recoil spring assembly and the factory barrel, put a light coat of oil on the RAMJET barrel exterior and hood, and drop it into the slide. Reinstall the recoil spring, slide the AFTERBURNER over the muzzle, and tighten the tapered screw to 15 inch-pounds with the supplied TORX bit. Reassemble, then function check before live fire. Keep the factory barrel: the Radian Ramjet Glock 19 Gen 3 Bronze returns to stock just as easily.
Honest trade-offs to weigh first
A compensator is not free performance. The Radian Ramjet Glock 19 Gen 3 Bronze is louder and more concussive for you and anyone beside you at the range, and shooting from a retention position close to the body puts hot gas and unburnt powder near your face and clothing. Barrel ports also add visible muzzle flash in low light. If the pistol wears a red dot, expect the lens to collect carbon faster and plan to wipe it after each range trip.
Holster fit is the other question. The AFTERBURNER adds a little length and bulk at the muzzle, so many open-bottom Kydex holsters work while closed-end or tightly molded holsters may not. Check with your holster maker before you carry. Ported barrels also bleed off some gas, so weak or very light range ammunition may not cycle as reliably; run a few hundred rounds of your carry load first. The kit is designed for factory slides and fits many aftermarket slides, but confirm with Radian before ordering for a custom slide.
Who the Radian Ramjet Glock 19 Gen 3 Bronze suits
The Radian Ramjet Glock 19 Gen 3 Bronze makes sense for Gen 3 Glock 19 owners who carry daily and want flatter follow-up shots plus a finish that shows the upgrade. It also suits anyone shopping for a Glock 19 Gen 3 compensator that needs no threaded barrel. It is less compelling if you rarely shoot or love your current holster. For shooters who train regularly and want faster, flatter follow-up shots, the Radian Ramjet Glock 19 Gen 3 Bronze is one of the cleanest upgrades available, since it leaves the slide and sights untouched.
Buy the Radian Ramjet Glock 19 Gen 3 Bronze from MAG5 Firearms
MAG5 Firearms is a family-owned FFL dealer in Collegeville, Pennsylvania. Barrels and compensators are not firearms under federal law, so this kit ships to your door without a transfer. Prefer another finish? See our black and gray Radian Ramjet for the Gen 3 Glock 19. For Radian’s own documentation, visit the Radian Weapons product page. Questions about fit? Call 610-943-0010 or email [email protected] and we will help you set up the Radian Ramjet Glock 19 Gen 3 Bronze with the right carry gear.
Reviews
There are no reviews yet.