Radian Ramjet Glock 17 Gen 5 Bronze Superb Afterburner Comp Barrel Kit

$409.95

Radian R0839 black and bronze kit for the Glock 17 Gen 5: a bronze Radianite 416R RAMJET ported barrel plus a black AFTERBURNER micro compensator on the threadless INTRA-LOK mount. Drop-in fit, no gunsmithing, no muzzle threads.

22 in stock

SKU: 810098420655 Categories: , , Tags: , , , Brand:

Description

The Radian Ramjet Glock 17 Gen 5 Bronze kit pairs a bronze Radianite-coated RAMJET ported barrel with a black AFTERBURNER micro compensator, built specifically for the Glock 17 Gen 5. It is Radian part number R0839, and it drops into the factory slide without gunsmithing, threading, or a longer slide. The result is a flatter-shooting pistol with a two-tone look: the compensator matches a black slide while the bronze barrel hood shows through the ejection port.

Radian Ramjet Glock 17 Gen 5 Bronze bronze ported barrel and black compensator

How the ported barrel and micro comp work together

Most pistol compensators need a threaded barrel and a comp you have to keep tight and timed. This kit skips all of that. The RAMJET barrel has ports cut near the muzzle, and the AFTERBURNER slides over the end of the barrel and locks on with Radian’s INTRA-LOK system: a tapered screw that pulls against a V-groove, so the comp centers itself on the bore every time it is tightened. There are no threads to gall and no crush washers to fiddle with.

When a round fires, gas escapes up through the barrel ports and out the top of the compensator just before the bullet leaves the muzzle. That upward jet pushes the muzzle down against the pistol’s natural flip. On a full-size duty pistol like the Glock 17 Gen 5, where muzzle rise is what slows follow-up shots, that is exactly where the Radian Ramjet Glock 17 Gen 5 Bronze earns its place.

Why choose the black and bronze finish

Radian offers this kit in all black, black and gray, and the black and bronze combination on this listing. The Radian Ramjet Glock 17 Gen 5 Bronze uses a bronze Radianite coating on the barrel and black Radianite on the AFTERBURNER. On a black slide the compensator blends in at the muzzle, while the bronze Glock 17 Gen 5 barrel hood gives a bold contrast at the ejection port. If you want the barrel to stand out, bronze is the most eye-catching of the three finishes. Radianite is not paint; it is a hard, low-friction coating that resists corrosion and carbon wear.

Radian Ramjet Glock 17 Gen 5 Bronze specifications

  • Fitment: Glock 17 Gen 5 and Glock 17 Gen 5 MOS only (not Gen 3, Gen 4, Gen 6, or any Glock 19)
  • Radian part number: R0839
  • UPC: 810098420655
  • Caliber: 9mm
  • Barrel: match-grade, ported, threadless muzzle, hardened 416R stainless steel
  • Compensator: hardened stainless steel with angled front faces to ease holstering
  • Finish: bronze Radianite barrel, black Radianite compensator
  • Mounting: INTRA-LOK tapered screw, torqued to 15 in.-lb.
  • Maintenance: coat the barrel-to-compensator interface with heat-resistant gun oil to prevent carbon lock
  • In the box: RAMJET barrel, AFTERBURNER compensator, INTRA-LOK tapered screw, TORX bit
  • Legality: sold by Radian as legal for sale in all 50 states

Glock 17 Gen 5 fitment notes

This bronze kit is cut for the Glock 17 Gen 5 and its 4.49-inch barrel. It will not fit a Gen 3 or Gen 4 G17, a Gen 6, or any Glock 19. Gen 5 slides are roll-marked Gen5, and MOS and non-MOS Gen 5 G17 slides take the same barrel.

A full-size G17 already shoots soft, so the Radian Ramjet Glock 17 Gen 5 Bronze pays off as speed: the dot or sights return to the target sooner and splits tighten. That makes it a popular choice for competition and for home defense pistols that see regular training. If you prefer an understated look, the black and gray kit is listed separately.

Installing it at the bench

Installation takes a few minutes. Remove the magazine, visually confirm the chamber is empty, and field strip the slide as the factory manual describes. Pull the recoil spring assembly and the factory barrel, put a light coat of oil on the RAMJET barrel exterior and hood, and drop it into the slide. Reinstall the recoil spring, slide the AFTERBURNER over the muzzle, and tighten the tapered screw to 15 inch-pounds with the supplied TORX bit. Reassemble, then function check before live fire. Keep the factory barrel: the Radian Ramjet Glock 17 Gen 5 Bronze returns to stock just as easily.

Honest trade-offs to weigh first

A compensator is not free performance. The Radian Ramjet Glock 17 Gen 5 Bronze is louder and more concussive for you and anyone beside you at the range, and shooting from a retention position close to the body puts hot gas and unburnt powder near your face and clothing. Barrel ports also add visible muzzle flash in low light. If the pistol wears a red dot, expect the lens to collect carbon faster and plan to wipe it after each range trip.

Holster fit is the other question. The AFTERBURNER adds a little length and bulk at the muzzle, so many open-bottom Kydex holsters work while closed-end or tightly molded holsters may not. Check with your holster maker before you carry. Ported barrels also bleed off some gas, so weak or very light range ammunition may not cycle as reliably; run a few hundred rounds of your carry load first. The kit is designed for factory slides and fits many aftermarket slides, but confirm with Radian before ordering for a custom slide.

Who the Radian Ramjet Glock 17 Gen 5 Bronze suits

The Radian Ramjet Glock 17 Gen 5 Bronze makes sense for Gen 5 Glock 17 owners who train often, shoot matches, or want the flattest-shooting version of their home defense pistol. It also suits anyone shopping for a Glock 17 Gen 5 compensator that needs no threaded barrel. It is less compelling if you rarely shoot or love your current holster. For shooters who train regularly and want faster, flatter follow-up shots, the Radian Ramjet Glock 17 Gen 5 Bronze is one of the cleanest upgrades available, since it leaves the slide and sights untouched.

Buy the Radian Ramjet Glock 17 Gen 5 Bronze from MAG5 Firearms

MAG5 Firearms is a family-owned FFL dealer in Collegeville, Pennsylvania. Barrels and compensators are not firearms under federal law, so this kit ships to your door without a transfer. Prefer another finish? See our black and gray Radian Ramjet for the Gen 5 Glock 17. For Radian’s own documentation, visit the Radian Weapons product page. Questions about fit? Call 610-943-0010 or email [email protected] and we will help you set up the Radian Ramjet Glock 17 Gen 5 Bronze with the right carry gear.

Additional information

Weight 0.000 lbs
Dimensions 0.000 × 0.000 × 0.000 in
upc

810098420655

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Search
×