EOTech EXPS3-0 Tan Holographic Sight Proven Night Vision QD Optic

$815.00

The EOTech EXPS3-0 in tan pairs a 68 MOA ring and 1 MOA dot with night vision settings, side buttons and a quick-detach lever mount.

84 in stock

SKU: 672294600350 Categories: , Tags: , , , , Brand:

Description

The EOTech EXPS3-0 Tan Holographic Sight is an EXPS3 holographic weapon sight in a tan housing, and its reticle is a 68 MOA ring with a 1 MOA center dot in red. It is the kind of sight you put on a rifle you plan to depend on, with fast target pickup, both eyes open shooting, and a reticle that stays sharp from contact distance out to the edge of carbine range.

EOTech EXPS3-0 Tan Holographic Sight EXPS3 holographic sight

EOTech EXPS3-0 Tan Holographic Sight Overview

EOTech part EXPS3-0TAN runs on one CR123 battery. The EXPS line puts the battery in the base, which keeps the housing short and frees up rail space, and the raised mount lets you co-witness with standard AR height iron sights in the lower third of the window. It also has 10 night vision settings that work with Gen I through III+ night vision devices, on top of 20 daylight settings. 2 oz, and it is rated water resistant to 33 ft (10 m). Battery life is about 1,000 hours at brightness setting 12.

Why Holographic Is Different

A standard red dot reflects an LED off a coated lens. An EOTech uses a laser diode to light a hologram of the reticle that is recorded inside the window. The result is a crisp reticle that looks like it sits out at the target, and it stays clean for many shooters with astigmatism who see a red dot as a starburst. If the window gets cracked or partly covered with mud, the remaining glass still shows the whole reticle.

EOTech EXPS3 tan front right view

The Reticle

This model uses a 68 MOA ring with a 1 MOA center dot. The big ring is fast to find at close range, and the small dot gives you a precise aiming point when the target is farther away. The reticle is shown in red. Windage and elevation adjust in 0.5 MOA clicks.

Controls and Mounting

You control brightness with side-mounted buttons that stay clear of a magnifier mounted behind it. The sight attaches with an adjustable locking quick-detach lever that fits 1 in Weaver and MIL-STD-1913 Picatinny rails. A single CR123 battery is common in weapon lights too, so it is easy to keep spares on hand.

EOTech EXPS3 tan rear and side buttons

Built for Hard Use

EOTech designs and builds its HWS sights in Michigan, and the line has served with U.S. military and law enforcement units for years. The housing is a protective hood over the window, the internal optics are fog resistant, and the sight is rated to work from -40 to 140 degrees F. Unlimited eye relief means you can mount it anywhere on the rail that suits your stance.

Adding a Magnifier

EOTech HWS sights pair well with the EOTech G33, G43 and G45 magnifiers. A magnifier mounted behind the sight gives you 3x or 5x for identifying targets and making longer shots, then swings out of the way when you need the unmagnified view again. Because the reticle is a hologram, it stays sharp through the magnifier instead of turning into a blurry blob.

Zeroing Tips

Most shooters zero an AR-15 carbine at 50 or 100 yards with the center dot. Start close at about 25 yards to get on paper, then move back and fine tune. Each click moves point of impact about half an inch at 100 yards, so small corrections are easy to make. Confirm zero with the ammunition you plan to carry.

Specifications

  • Brand: EOTech
  • Model: EXPS3-0TAN
  • UPC: 672294600350
  • Reticle: 68 MOA ring with a 1 MOA center dot
  • Reticle color: red
  • Housing color: tan
  • Power: one CR123 battery
  • Night vision settings: 10 (Gen I to III+)
  • Daylight settings: 20
  • Adjustment: 0.5 MOA per click
  • Water resistance: 33 ft (10 m)
  • Size: about 3.8 x 2.3 x 2.9 in
  • Weight: about 11.2 oz

Before You Buy

Optics do not require an FFL transfer. Check that you have room on your rail for the EXPS3 and any magnifier you plan to add, and confirm iron sight height if you want to co-witness.

Who It Is For

The EOTech EXPS3-0 Tan Holographic Sight is a great fit for AR-15 and carbine owners, duty and home defense rifles, and anyone who wants a fast, rugged sight with a reticle that works up close and farther out.

Buy the EOTech EXPS3-0 Tan Holographic Sight at MAG5 Firearms

MAG5 Firearms is a family-owned shop in Collegeville, Pennsylvania. Optics do not require an FFL transfer, so the EOTech EXPS3-0 Tan Holographic Sight ships straight to your door. Browse our full selection of red dot sights for more optics. For factory details, visit EOTech.

EOTech EXPS3-0 Tan Holographic Sight

Additional information

Weight 1.380 lbs
Dimensions 0.000 × 0.000 × 0.000 in
upc

672294600350

brand

EOTech

color

Tan

drilled_or_tapped

false

finish

Tan

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Search
×