Description
The DNZ Freedom Reaper 30mm 20 MOA Mount (DNZ item 321FPT2) is a one-piece, forward-offset Picatinny scope mount with integral 30mm rings and 20 MOA of built-in cant. It is machined from a solid block of 6061-T6 aluminum, finished in matte black, and made for modern sporting rifles and other flat-top rifles where you need to push the scope forward for correct eye relief.
DNZ Freedom Reaper 30mm 20 MOA Mount Overview
DNZ is known for one-piece mounts that combine base and rings in a single part. With no separate rings to align, there are no moving parts between the rifle and the scope, which removes a common source of zero shift. DNZ states its Freedom Reaper mounts are much lighter than comparable one-piece mounts, which helps keep a rifle balanced when you add a full-size scope.
Why 20 MOA
The mount is tapered so the front ring sits slightly lower than the rear, giving 20 MOA of downward cant. That lets a long-range scope use more of its internal elevation travel before running out, so you can dial for farther targets. Per DNZ, the front ring sits about .03 inch lower than on a standard straight mount. If you mostly shoot inside 300 yards, a 0 MOA mount is usually simpler to zero.
Forward Offset and Height
The cantilever design pushes the rings forward of the clamp. On an AR-15 or AR-10, this places the scope where most shooters get proper eye relief with the head upright. DNZ lists the standard Freedom Reaper Picatinny height as extra high, which suits the tall sight line of AR-pattern rifles and leaves room for larger objective lenses.
Ring Hardware
All DNZ Freedom Reaper ring screws are 6-40 by 5/8 inch and use a 7/64 inch Allen wrench. Tighten the cap screws evenly in a crisscross pattern and follow the scope maker torque limit. Push the mount forward in the rail slot before tightening the clamp so the recoil lug bears against the front of the slot.
Installation Tips
Install the mount on the upper receiver rail rather than spanning the gap onto a separate handguard rail, which can move independently on some rifles. Level the reticle before final torque, then zero at 100 yards. With a 20 MOA base, you may need to dial a good deal of down elevation for the initial zero; check that your scope has enough travel.
Honest Limitations
This mount fits 30mm scope tubes only and needs a Picatinny rail. Extra-high height can feel tall on bolt-action rifles with low combs. Some short-range scopes do not have enough downward travel to zero comfortably on a 20 MOA base, so confirm your scope specifications first. Only one verified distributor photo of this exact mount is currently available. Note that this product was listed under Night Vision on our site; it is a scope mount.
Specifications
- Brand: DNZ Products
- Model: Freedom Reaper Forward Picatinny
- Item number: 321FPT2
- UPC: 879956006592
- Ring diameter: 30mm
- Cant: 20 MOA
- Style: One-piece cantilever with integral rings
- Height: Extra high (DNZ standard)
- Ring screws: 6-40 x 5/8 in, 7/64 in Allen
- Material: Billet 6061-T6 aluminum
- Finish: Matte black
Before You Buy
Confirm your scope has a 30mm tube and enough downward elevation adjustment for a 20 MOA base. Scope mounts are not firearms, so no FFL transfer is needed and this ships straight to you.
Who It Is For
The DNZ Freedom Reaper 30mm 20 MOA Mount is a great fit for AR-15 and AR-10 owners who want a light, one-piece cantilever mount for a 30mm scope and extra elevation for longer shots.
Buy the DNZ Freedom Reaper 30mm 20 MOA Mount at MAG5 Firearms
MAG5 Firearms is a family-owned FFL in Collegeville, Pennsylvania. Order the DNZ Freedom Reaper 30mm 20 MOA Mount online, or browse our optics section for scopes, rings and mounts. For factory details, visit DNZ Products.
Reviews
There are no reviews yet.