Canik METE SFT Black FDE 9mm – Superb Two Tone 10 Round

Description

This is the two tone METE SFT built for Massachusetts and other capacity restricted markets. The Canik METE SFT Black FDE 9mm keeps everything that made the full size METE popular, from the short reset trigger to the co witnessing optic cut and the famously overloaded case, and pairs it with ten round magazines so it stays legal. Nothing about the gun itself has been softened.

Two Tone Full Size, Compliant Magazines

The trigger remains the reason to look at this platform. Canik runs a short reset trigger on nickel coated action components, producing a light take up, a clean wall and a reset that is both short and clearly felt. Factory striker fired triggers of this quality are still unusual, and on a ten round gun where every shot counts a little more, it earns its keep.

Dimensions are duty standard. The pistol is 7.56 inches long, 5.78 inches tall and 1.41 inches wide, weighing around 27.8 ounces empty, with a 4.46 inch barrel. Holsters and lights are easy to source because it sits in the same envelope as the reference full size guns, and there is enough mass to keep it steady.

The two tone finish is more than decoration. A black slide over a flat dark earth frame hides handling marks better than all black does, and the frame carries interchangeable backstraps and an accessory rail. A speed magwell is included and bolts on, which matters more here because ten round magazines mean more reloads.

Optics, Sights And Case Contents

The optic ready slide on the Canik METE SFT Black FDE 9mm uses a co witnessing cut, and three optic bases ship in the case covering the Shield RMSc, the Trijicon RMR and the Canik ONYXc and PHANTOMc patterns. Co witnessing keeps the irons visible through the optic window, so a flat battery does not leave you without a sight picture.

Sights are a white dot front against a white dot rear, and the rear has an angled leading edge so the slide can be racked one handed against a belt, a holster lip or a boot heel. It is an emergency provision that costs nothing to include and is worth knowing about.

The case is the usual Canik overkill: two magazines, three optic bases, a speed magwell, a spare backstrap, an inside or outside the waistband holster, a punch, a tool kit, a bore brush, a patch rod and a lock. Almost nothing on the usual new pistol shopping list is left over.

Canik METE SFT Black FDE 9mm Specifications

• Caliber: 9mm Luger
• Capacity: 10 rounds, two magazines included
• Barrel length: 4.46 inches
• Overall length: 7.56 inches
• Height: 5.78 inches
• Width: 1.41 inches
• Weight: approximately 27.8 ounces unloaded
• Action: striker fired, short reset trigger
• Internals: nickel coated action components
• Optic: optic ready, co witnessing cut, three optic bases included
• Optic compatibility: Shield RMSc, Trijicon RMR, Canik ONYXc and PHANTOMc
• Front sight: white dot
• Rear sight: white dot with angled edge for one handed operation
• Frame: polymer, flat dark earth, interchangeable backstraps and accessory rail
• Slide: black
• Included: hard case, holster, speed magwell, magazine loader, tool kit, bore brush, gun lock

This part number is built to Massachusetts requirements and ships with ten round magazines. Buyers elsewhere should check whether the standard eighteen round SFT is available to them instead, and Canik also lists the compact SF and the 5.2 inch SFX on the same frame family.

Why Buyers Choose The Canik METE SFT Black FDE 9mm

Compliant pistols usually feel like the short straw. This one does not. The Canik METE SFT Black FDE 9mm keeps the trigger, the optic cut, the sights and the accessory package intact, so the only concession is magazine capacity.

The case contents remain the strongest part of the pitch. Three optic bases, a holster, a speed magwell, a loader and a tool kit would add well over a hundred dollars if bought separately, and they are standard equipment here.

And the two tone finish gives it some presence. Black over flat dark earth is a combination that has aged well, and it hides the scuffs that a gun picks up in a holster far better than a plain black finish manages.

Who Should Buy The Canik METE SFT Black FDE 9mm

This suits home defence, range work and training in Massachusetts and other restricted markets, and anyone competing where loads are capped at ten. It makes a strong first centrefire pistol because the package is complete and the trigger is forgiving of a new shooter. At 7.56 inches long it is too large for most concealed carry, so look at the METE MC9 family for that role instead.

Full manufacturer specifications for the Canik METE SFT Black FDE 9mm are published by Canik on the official product page. Browse more Canik pistols and duty guns in our handguns category.