Trijicon DI Night Sight Retainer Yellow 2 Pack Reliable

$25.26

Two yellow replacement retainers and a T10 torque L-key for Trijicon DI Night Sight front blades. Clamps the interchangeable fiber and sets the front ring colour. Trijicon part AC50014.

183 in stock

SKU: 719307215429 Categories: , Tags: , Brand:

Description

The Trijicon DI Night Sight Retainer Yellow pack is part number AC50014: two yellow retainers and a T10 torque L-key for Trijicon DI Night Sight front blades. The retainer clamps the interchangeable fiber in place and forms the coloured ring you see around it in daylight.

Trijicon DI Night Sight Retainer Yellow

Yellow Is A Background Decision

Front sight colour is not a matter of taste, it is a matter of what you shoot against. Yellow separates strongly from dark backgrounds: black silhouettes, dark clothing, brick, asphalt, and the low contrast interior of a building.

That makes the Trijicon DI Night Sight Retainer Yellow the right pick for indoor ranges, for a home defence pistol, and for anyone whose training happens mostly on dark cardboard. Against sand, pale brick or dry grass it has less to work with, and an orange or white ring will read better.

Why The DI Sight Lets You Change This At All

On most fiber optic front sights the rod is bonded permanently into the blade. Break it or dislike it and the blade is scrap. Trijicon designed the DI sight around a clamped fiber instead, which is the patent pending part of the design.

That decision is what makes a Trijicon DI Night Sight Retainer Yellow pack useful. You can change the ring colour to suit the shooting you are actually doing, or change it back, without buying a new front sight or visiting a gunsmith.

Two In The Pack And A Torque Key

Trijicon supplies two retainers and the correct T10 torque L-key. The key matters. A retainer is a small fastener clamping a polymer rod, and the failure modes are predictable: over tighten and you craze the fiber, under tighten and it walks out under recoil.

Use the key in the Trijicon DI Night Sight Retainer Yellow pack, seat the fastener firmly and stop there. The second retainer is in the box because small parts get dropped, and because plenty of shooters run DI sights on more than one pistol.

Trijicon DI Night Sight Retainer Yellow Pack Contents

  • Contents: 2 yellow retainers and 1 T10 torque L-key
  • Colour: Yellow
  • Application: Trijicon DI Night Sight front blades
  • Function: clamps the interchangeable fiber and frames it visually
  • Manufacturer Part Number: AC50014

Retainer Or Fiber: Order The Right One

These are two separate consumables and they solve different problems. The fiber is the glowing rod. It cracks from impact, shears against a rough holster mouth, and dulls with solvent and ultraviolet light. If the front sight has gone dark, fiber is what you need.

The retainer is the clamp. You replace it when you want a different ring colour or when a fastener has been chewed by the wrong driver. A Trijicon DI Night Sight Retainer Yellow pack will not bring a dead front sight back to life on its own, and Trijicon sells a combined kit if you want to change both at once.

Why Keep A Pack On Hand

  • Yellow ring that separates strongly from dark backgrounds
  • Suits indoor ranges, dark silhouettes and home defence use
  • Two retainers per pack, so a dropped one is not a problem
  • Includes the correct T10 torque L-key
  • Changes the look of a DI front sight without buying a new blade

Matching Ring To Fiber

The ring and the fiber do not have to be the same colour, and there is an argument for deliberately contrasting them. A green fiber inside a yellow ring gives you two related but distinct cues, and in bad light the fiber goes quiet while the ring keeps working.

There is also an argument for keeping them close so the front sight reads as one object rather than a target. Try it both ways before deciding, which is exactly the flexibility a Trijicon DI Night Sight Retainer Yellow pack exists to give you.

Which Sights These Fit

These retainers are cut for Trijicon DI Night Sight front blades only. Conventional Trijicon fiber sights hold their rods with melted heads rather than a clamp and take no retainer at all, and these are not a generic part that fits another manufacturer’s sights.

If you are not sure your front sight is a DI model, send us the sight part number and we will check before you order the Trijicon DI Night Sight Retainer Yellow pack. It is inexpensive, but the wrong part is still a wasted order and a wasted week.

Ordering

If you are looking at complete DI sight sets rather than spares, browse the rest of our optics and sights and read the manufacturer product page for the current specification.

MAG5 Firearms is a family owned FFL dealer in Collegeville, Pennsylvania. Every Trijicon DI Night Sight Retainer Yellow pack we list is a genuine Trijicon item sourced through authorized channels. If you are unsure whether you need retainers, fiber, or both, reach out before you order and we will give you an honest answer.

Additional information

Weight 0.120 lbs
Dimensions 8.100 × 5.000 × 0.900 in
upc

719307215429

brand

Trijicon

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Search
×