Burris Picatinny Riser 410340 – Superb Optic Riser

Description

The Burris Picatinny Riser 410340 is an optic riser from Burris (model Picatinny Riser), listed for AR-15 / M16 with a Picatinny Rail interface.

Burris Picatinny Riser 410340 Overview

A riser lifts a red dot, magnifier or scope higher above the rail so it lines up with your eye when you shoot with a heads-up posture, wear a helmet or run a tall stock.

Height changes your zero and the holdovers you use up close, so plan the setup as a whole rather than adding height for its own sake.

Fit and Compatibility

The distributor lists fit as AR-15 / M16. Mount type: Picatinny Rail. Height: 0.50″. Confirm the exact firearm model, receiver or slide cut, and the optic you plan to run before ordering, because mounting parts are made to precise dimensions and a near miss does not fit.

Installation Tips

Degrease the screws and mating surfaces, then snug the fasteners in an even, alternating pattern. Use a torque wrench and follow the maker’s inch-pound values; overtightening can crush a scope tube or strip threads, while undertightening lets the optic walk under recoil. A drop of thread locker on base screws, but not ring cap screws unless the maker says so, keeps everything in place.

Build and Materials

It is made from steel and finished in black, with a listed weight of 3.4oz and a length of 1.50″. Machined aluminum and steel parts hold tolerances well, while polymer parts save weight and resist corrosion.

Holding Zero

The real test of any mount is return to zero: the optic should come off and go back on, or ride through hundreds of rounds, without the point of impact wandering. Rigid materials, precise machining and correct torque all contribute. Witness marks with a paint pen make it easy to spot movement at a glance.

Honest Limitations

No single mounting part fits every firearm and optic. Height, eye relief, footprint and rail spacing all vary, and a part that is perfect for one setup can be wrong for another. Budget mounts can work well on rimfires and light recoiling rifles, but heavy recoil and duty use reward premium machining.

Care and Storage

Wipe off dirt and moisture after a wet hunt with a microfiber cloth, keep a small set of the correct bits or wrenches in your range bag, and check fasteners at the start of each season. A light coat of oil on steel parts prevents rust, while anodized aluminum only needs to be kept clean. Protect the optic from dust and rain when the rifle is stored or cased.

Before You Buy

Match the part to your exact firearm and optic, check the height and size listed above, and contact us with the model of your rifle, pistol or scope if you are unsure. Mounting parts and optic accessories are not firearms and ship without an FFL transfer.

Specifications

• Brand: Burris
• Model: Picatinny Riser
• Manufacturer number: 410340
• Type: optic riser
• Fits: AR-15 / M16
• Mount type: Picatinny Rail
• Height: 0.50″
• Material: Steel
• Finish: Black
• Weight: 3.4oz
• Length: 1.50″
• UPC: 381103406

Who It Is For

The Burris Picatinny Riser 410340 is a great fit for shooters who run a heads-up posture, a tall stock or a helmet.

Buy the Burris Picatinny Riser 410340 at MAG5 Firearms

MAG5 Firearms is a family-owned FFL in Collegeville, Pennsylvania. Order the Burris Picatinny Riser 410340 online, or browse our scope mounting and optics categories for more. For factory details, visit Burris.