Description
The Radian Ramjet Glock 48 Bronze kit pairs a bronze Radianite-coated RAMJET ported barrel with a black AFTERBURNER micro compensator, built specifically for the Glock 48. It is Radian part number R0845, and it drops into the factory slide without gunsmithing, threading, or a longer slide. The result is a flatter-shooting pistol with a two-tone look: the compensator matches a black slide while the bronze barrel hood shows through the ejection port.
How the ported barrel and micro comp work together
Most pistol compensators need a threaded barrel and a comp you have to keep tight and timed. This kit skips all of that. The RAMJET barrel has ports cut near the muzzle, and the AFTERBURNER slides over the end of the barrel and locks on with Radian’s INTRA-LOK system: a tapered screw that pulls against a V-groove, so the comp centers itself on the bore every time it is tightened. There are no threads to gall and no crush washers to fiddle with.
When a round fires, gas escapes up through the barrel ports and out the top of the compensator just before the bullet leaves the muzzle. That upward jet pushes the muzzle down against the pistol’s natural flip. On a slimline single-stack carry pistol like the Glock 48, where muzzle rise is what slows follow-up shots, that is exactly where the Radian Ramjet Glock 48 Bronze earns its place.
Why choose the black and bronze finish
Radian offers this kit in all black, black and gray, and the black and bronze combination on this listing. The Radian Ramjet Glock 48 Bronze uses a bronze Radianite coating on the barrel and black Radianite on the AFTERBURNER. On a black slide the compensator blends in at the muzzle, while the bronze Glock 48 barrel hood gives a bold contrast at the ejection port. If you want the barrel to stand out, bronze is the most eye-catching of the three finishes. Radianite is not paint; it is a hard, low-friction coating that resists corrosion and carbon wear.
Radian Ramjet Glock 48 Bronze specifications
- Fitment: Glock 48 and Glock 48 MOS only (not the G43X or G43)
- Radian part number: R0845
- UPC: 810098420716
- Caliber: 9mm
- Barrel: match-grade, ported, threadless muzzle, hardened 416R stainless steel
- Compensator: hardened stainless steel with angled front faces to ease holstering
- Finish: bronze Radianite barrel, black Radianite compensator
- Mounting: INTRA-LOK tapered screw, torqued to 15 in.-lb.
- Maintenance: coat the barrel-to-compensator interface with heat-resistant gun oil to prevent carbon lock
- In the box: RAMJET barrel, AFTERBURNER compensator, INTRA-LOK tapered screw, TORX bit
- Legality: sold by Radian as legal for sale in all 50 states
Glock 48 fitment notes
This bronze kit is cut for the Glock 48 and its 4.17-inch barrel, and it fits both the standard G48 and the G48 MOS. The G43X looks similar but uses a shorter barrel, so it needs a different Radian kit, and double-stack Glocks are not compatible at all. The factory recoil spring assembly stays in place.
On a slimline carry pistol, the Radian Ramjet Glock 48 Bronze does two jobs: it tames the snap of a light, narrow 9mm, and it gives the pistol a distinct black and bronze look. Pair it with a bronze Radian Anchor magwell for the G43X and G48 to carry the finish down to the grip, or a Quick Tune guide rod to match spring weight to your carry load.
Installing it at the bench
Installation takes a few minutes. Remove the magazine, visually confirm the chamber is empty, and field strip the slide as the factory manual describes. Pull the recoil spring assembly and the factory barrel, put a light coat of oil on the RAMJET barrel exterior and hood, and drop it into the slide. Reinstall the recoil spring, slide the AFTERBURNER over the muzzle, and tighten the tapered screw to 15 inch-pounds with the supplied TORX bit. Reassemble, then function check before live fire. Keep the factory barrel: the Radian Ramjet Glock 48 Bronze returns to stock just as easily.
Honest trade-offs to weigh first
A compensator is not free performance. The Radian Ramjet Glock 48 Bronze is louder and more concussive for you and anyone beside you at the range, and shooting from a retention position close to the body puts hot gas and unburnt powder near your face and clothing. Barrel ports also add visible muzzle flash in low light. If the pistol wears a red dot, expect the lens to collect carbon faster and plan to wipe it after each range trip.
Holster fit is the other question. The AFTERBURNER adds a little length and bulk at the muzzle, so many open-bottom Kydex holsters work while closed-end or tightly molded holsters may not. Check with your holster maker before you carry. Ported barrels also bleed off some gas, so weak or very light range ammunition may not cycle as reliably; run a few hundred rounds of your carry load first. The kit is designed for factory slides and fits many aftermarket slides, but confirm with Radian before ordering for a custom slide.
Who the Radian Ramjet Glock 48 Bronze suits
The Radian Ramjet Glock 48 Bronze makes sense for concealed carriers who practice with their G48 and want it to shoot more like a larger pistol, with a finish that stands out. It also suits anyone shopping for a Glock 48 compensator that needs no threaded barrel. It is less compelling if you rarely shoot or love your current holster. For shooters who train regularly and want faster, flatter follow-up shots, the Radian Ramjet Glock 48 Bronze is one of the cleanest upgrades available, since it leaves the slide and sights untouched.
Buy the Radian Ramjet Glock 48 Bronze from MAG5 Firearms
MAG5 Firearms is a family-owned FFL dealer in Collegeville, Pennsylvania. Barrels and compensators are not firearms under federal law, so this kit ships to your door without a transfer. Prefer another finish? See our black and gray Radian Ramjet for the Glock 48. For Radian’s own documentation, visit the Radian Weapons product page. Questions about fit? Call 610-943-0010 or email [email protected] and we will help you set up the Radian Ramjet Glock 48 Bronze with the right carry gear.
Reviews
There are no reviews yet.