Description
The Talley Model 70 Mount 30mm High (Talley item 750702) is a one-piece alloy ring and base set for Winchester Model 70 rifles with .860 inch standard caliber and short action screw spacing. It sets a 30mm scope at high height for larger objective lenses, with 0 MOA of cant and a black finish. Talley lists the 30mm high set at about 2.9 ounces.
Talley Model 70 Mount 30mm High Overview
Each Talley ring is machined together with its own base and attaches straight to the receiver. That removes the ring-to-base clamp found on two-piece systems, along with the risk of it loosening. The mount arrives ready to install, and Talley says it requires no lapping. It is a simple, rigid way to put a modern 30mm scope on a classic Model 70.
High Height for Bigger Glass
According to the Talley chart, the high 30mm set measures about .733 inch at the rear ring and .600 inch at the front, measured to the bottom of the scope tube. That clearance suits 30mm scopes with 50mm objectives and tall turrets. The trade-off is a taller sight line, so check your cheek weld on the stock; if your scope clears with low or medium rings, the lower option gives a more natural head position.
Fit and Screw Size
This mount is made for the .860 spacing found on standard caliber and short action Model 70 receivers. Long action and magnum rifles need a different part. Talley offers the design for both 6-48 and 8-40 receiver screws, so confirm the screw size on your rifle before installing, because production years differ.
Installation Tips
Clean the receiver holes and base screws and use a small drop of medium thread locker on the base screws. Seat the rings, set the scope for eye relief, and level the reticle.
Tighten the cap screws evenly in a crisscross pattern with a torque driver, staying within the scope maker limit. Work the bolt through its full travel to confirm clearance.
Light and Strong
Talley machines its mounts from high-strength aluminum alloy and says they deliver more strength than many steel rings and bases while weighing less. On a sporter-weight Model 70, the savings help the rifle carry and balance well in the field.
Scope Pairing Ideas
Thirty millimeter scopes in the 3-15×50 or 4-16×50 class pair naturally with this high set. They give plenty of magnification for open country while the 50mm objective gathers light at dawn and dusk. Check that the scope has enough tube length between turret and bells for Model 70 ring spacing.
Honest Limitations
This set fits Model 70 rifles with .860 spacing and 30mm tubes only. High rings raise the sight line, and there is no built-in cant for extended range work. Alloy rings should be torqued carefully. Only one verified distributor photo of this exact part is currently available.
Specifications
- Brand: Talley
- Model: Lightweight Alloy Scope Mount
- Item number: 750702
- UPC: 876430007175
- Fits: Winchester Model 70, .860 standard caliber and short action
- Tube diameter: 30mm
- Height: High, about .733 in rear and .600 in front
- Weight: about 2.9 oz per set
- Cant: 0 MOA
- Finish: Black
- Design: One-piece ring and base
- Made in U.S.A.
Before You Buy
Confirm your Model 70 action length, screw spacing and screw size, and your scope tube diameter. Scope mounts are not firearms, so no FFL transfer is needed and this ships straight to you.
Who It Is For
The Talley Model 70 Mount 30mm High is a great fit for Model 70 owners mounting a 30mm scope with a 50mm objective who want a light, rigid, one-piece mount.
Buy the Talley Model 70 Mount 30mm High at MAG5 Firearms
MAG5 Firearms is a family-owned FFL in Collegeville, Pennsylvania. Order the Talley Model 70 Mount 30mm High online, or browse our optics section for scopes, rings and mounts. For factory details, visit Talley Manufacturing.
Reviews
There are no reviews yet.