Federal Freight Train 20ga Sabot Slug – Powerful Rifled Barrel Deer Slugs, 5 Rounds

Description

Federal Freight Train 20ga Sabot Slug ammunition gives rifled barrel 20 gauge shotguns rifle like accuracy and hard hitting performance on deer, bear and hogs. Each 3 inch shell fires a 275 grain polymer tipped copper sabot slug at about 1,900 feet per second. Federal reports groups of less than 4 inches at 200 yards through rifled barrels. Each box holds 5 rounds.

• Long Range Accuracy From a 20 Gauge
• Federal Freight Train 20ga Sabot Slug Specifications
• Field Notes and Deer Hunting Tips

Long Range Accuracy From a 20 Gauge

FreightTrain builds on Federal’s Trophy Copper sabot design with a redesigned sabot and wad that improve consistency. The sabot aligns the slug in the bore and separates cleanly at the muzzle, helping each shot fly true. Federal designed the sabot and propellant to behave the same across a wide temperature range, so performance stays consistent from early season to late winter.

A polymer tip and aerodynamic nose help the slug keep velocity and energy downrange, with a listed ballistic coefficient of about .171. That is impressive for a slug and helps a 20 gauge reach well beyond typical slug distances in capable hands.

The externally skived nose cavity was tuned for deeper penetration than the original Trophy Copper while still producing dramatic expansion. The all copper construction meets lead free requirements, making it a solid choice where lead projectiles are restricted.

Federal Freight Train 20ga Sabot Slug Specifications

These figures follow Federal’s published data for item P209 FT, which matches the distributor listings for UPC 604544696653.

• Brand: Federal Premium
• Product line: FreightTrain Copper Sabot Slug
• Manufacturer item number: P209FT
• Gauge: 20 gauge
• Shell length: 3 inch
• Slug: 275 grain polymer tipped copper sabot (5/8 oz)
• Muzzle velocity: about 1,900 fps
• Ballistic coefficient: about .171
• Lead free: yes
• Rounds per box: 5

Field Notes and Deer Hunting Tips

Use Federal Freight Train 20ga Sabot Slug shells only in shotguns with fully rifled slug barrels. Sabot slugs need rifling to spin and stabilize, and they will not group well from smooth bore barrels.

Zero your slug gun at 100 yards, then confirm your drop at 150 and 200 yards before attempting longer shots. A scope or red dot mounted on a cantilever or receiver base helps you take full advantage of this load’s accuracy.

Clean your barrel regularly. Sabot plastic can build up in rifling and hurt accuracy, so a good cleaning every few boxes keeps groups tight.

Check your state regulations for slug and shotgun only zones, and confirm that lead free projectiles meet local requirements if they apply.

If you hunt deer, bear or hogs with a rifled 20 gauge and want accuracy that rivals many rifles, Federal Freight Train 20ga Sabot Slug shells are a powerful, proven choice. Pair them with a dedicated slug gun for best results.

Many states and counties restrict deer hunting to shotguns, muzzleloaders or straight wall cartridges. In those areas, a rifled 20 gauge loaded with Federal Freight Train 20ga Sabot Slug shells can deliver accuracy that once required a centerfire rifle. The 20 gauge also recoils less than a 12 gauge slug gun, which helps with practice and shot placement.

Practice from a bench to confirm zero, then from shooting sticks or a tree stand rail to mimic real hunting positions. A consistent cheek weld and smooth trigger press matter just as much with a slug gun as with a rifle.

Store slugs in a cool, dry place and carry a few extra in a pocket or shell holder when you head to the stand. Because sabot slugs are designed for rifled barrels, keep them clearly separated from any buckshot or birdshot so the right load always goes into the right gun.

Shooting a smooth bore barrel? Consider Federal Premium 20 Gauge 3 in. 1 oz Ultra Slug, or read Federal’s FreightTrain product page for ballistics.